Daily Papers

Temperature-emissivity-texture (TeX) decomposition seeks to recover object heat state, material spectral response, and visible-like geometric texture from long-wave infrared hyperspectral imaging (LWIR HSI). Existing TeX pipelines are mainly scene-specific inverse solvers, and the lack of paired LWIR HSI-TeX supervision has limited learning-based decomposition. To address this gap, we introduce TeX-1500, a large-scale paired LWIR HSI-TeX dataset and benchmark for supervised HSI-to-TeX decomposition. TeX-1500 contains 1,522 calibrated real-scene pairs from DARPA Invisible Headlights (DARPA IH) pushbroom imagery and our FTIR acquisitions, covering five locations, four seasons, diverse acquisition times, heterogeneous wavelength layouts, and two sensor families. Each sample stores a calibrated valid-band radiance cube, calibrated wavelength positions, and aligned temperature, emissivity, and texture supervision constructed through a consistent restoration and TeX-construction protocol. We further provide TeX-UNet, a simple wavelength-aware baseline that maps calibrated HSI bands and wavelength positions to TeX fields. Experiments on the held-out DARPA IH pushbroom scenes and zero-/few-shot transfer to FTIR scenes show that TeX-1500 provides usable paired supervision and a measurable benchmark for data-driven physical-property-centered thermal perception.

It is well known that there is a particle-hole symmetry for spin-polarized electrons with two-body interactions in a partially filled Landau level, which becomes exact in the limit where the cyclotron energy is large compared to the interaction strength, so one can ignore mixing between Landau levels. This symmetry is explicit in the description of a half-filled Landau level recently introduced by D. T. Son, using Dirac fermions, but it was thought to be absent in the older fermion-Chern- Simons approach, developed by Halperin, Lee, and Read and subsequent authors. We show here, however, that when properly evaluated, the Halperin, Lee, Read (HLR) theory gives results for long-wavelength low-energy physical properties, including the Hall conductance in the presence of impurities and the positions of minima in the magnetoroton spectra for fractional quantized Hall states close to half-filling, that are identical to predictions of the Dirac formulation. In fact, the HLR theory predicts an emergent particle-hole symmetry near half filling, even when the cyclotron energy is finite.

Materials combining both a high refractive index and a wide band gap are of great interest for optoelectronic and sensor applications. However, these two properties are typically described by an inverse correlation with high refractive index appearing in small gap materials and vice-versa. Here, we conduct a first-principles high-throughput study on more than 4000 semiconductors (with a special focus on oxides). Our data confirm the general inverse trend between refractive index and band gap but interesting outliers are also identified. The data are then analyzed through a simple model involving two main descriptors: the average optical gap and the effective frequency. The former can be determined directly from the electronic structure of the compounds, but the latter cannot. This calls for further analysis in order to obtain a predictive model. Nonetheless, it turns out that the negative effect of a large band gap on the refractive index can counterbalanced in two ways: (i) by limiting the difference between the direct band gap and the average optical gap which can be realized by a narrow distribution in energy of the optical transitions and (ii) by increasing the effective frequency which can be achieved through either a high number of transitions from the top of the valence band to the bottom of the conduction or a high average probability for these transitions. Focusing on oxides, we use our data to investigate how the chemistry influences this inverse relationship and rationalize why certain classes of materials would perform better. Our findings can be used to search for new compounds in many optical applications both in the linear and non-linear regime (waveguides, optical modulators, laser, frequency converter, etc.).

Superconducting nanowire single-photon detectors are widely used in various fields of physics and technology, due to their high efficiency and timing precision. Although, in principle, their detection mechanism offers broadband operation, their wavelength range has to be optimized by the optical cavity parameters for a specific task. We present a study of the optical absorption of a superconducting nanowire single photon detector (SNSPD) with an optical cavity. The optical properties of the niobium nitride films, measured by spectroscopic ellipsometry, were modelled using the Drude-Lorentz model with quantum corrections. The numerical simulations of the optical response of the detectors show that the wavelength range of the detector is not solely determined by its geometry, but the optical conductivity of the disordered thin metallic films contributes considerably. This contribution can be conveniently expressed by the ratio of imaginary and real parts of the optical conductivity. This knowledge can be utilized in detector design.

We report an optical method of generating arbitrary polarization states by manipulating the thicknesses of a pair of uniaxial birefringent plates, the optical axes of which are set at a crossing angle of {\pi}/4. The method has the remarkable feature of being able to generate a distribution of arbitrary polarization states in a group of highly discrete spectra without spatially separating the individual spectral components. The target polarization-state distribution is obtained as an optimal solution through an exploration. Within a realistic exploration range, a sufficient number of near-optimal solutions are found. This property is also reproduced well by a concise model based on a distribution of exploration points on a Poincar\'e sphere, showing that the number of near-optimal solutions behaves according to a power law with respect to the number of spectral components of concern. As a typical example of an application, by applying this method to a set of phase-locked highly discrete spectra, we numerically demonstrate the continuous generation of a vector-like optical electric field waveform, the helicity of which is alternated within a single optical cycle in the time domain.

Correlative computational microscopy is accelerating the mapping of dynamic biological systems by integrating morphological and molecular measurements across spatial scales, from organelles to entire organisms. Visualization, measurement, and prediction of interactions among the components of biological systems can be accelerated by generalist computational imaging frameworks that relax the trade-offs imposed by multiplex dynamic imaging. This work reports a generalist framework for wave optical imaging of the architectural order (waveOrder) among biomolecules for encoding and decoding multiple specimen properties from a minimal set of acquired channels, with or without fluorescent labels. waveOrder expresses material properties in terms of elegant physically motivated basis vectors directly interpretable as phase, absorption, birefringence, diattenuation, and fluorophore density; and it expresses image data in terms of directly measurable Stokes parameters. We report a corresponding multi-channel reconstruction algorithm to recover specimen properties in multiple contrast modes. With this framework, we implement multiple 3D computational microscopy methods, including quantitative phase imaging, quantitative label-free imaging with phase and polarization, and fluorescence deconvolution imaging, across scales ranging from organelles to whole zebrafish. These advances are available via an extensible open-source computational imaging library, waveOrder, and a napari plugin, recOrder.

Using observations from GMRT and FAST, we conducted multi-wavelength studies on PSR J1948+3540 and analyzed its intensity modulation characteristics in detail. We found that the intensity modulation of this pulsar exhibits broad low-frequency modulation features. The modulation frequency/period is time-dependent, but the dominant modulation component varies with the observing frequency. Specifically, at low frequencies, the modulation is dominated by the first half of the middle component, while at high frequencies, it is dominated by the second half of the middle component. Spectral analysis revealed that the intensities of the leading and trailing components vary with the observing frequency, but the middle component does not change significantly. Besides, the polarization analyses reveal that the peak of the radiation intensity is located in the latter half of the middle component, whereas the linear polarization is dominant in the former half. However, due to the low degree of linear polarization, the change of the dominant modulation component with the observed frequency is not caused by the variation in linear polarization. The phenomenon of the dominant modulation component varying with observing frequency has not been reported before and remains difficult to understand within the current theoretical framework.

Holographic Metasurface Transceivers (HMTs) are emerging as cost-effective substitutes to large antenna arrays for beamforming in Millimeter and TeraHertz wave communication. However, to achieve desired channel gains through beamforming in HMT, phase-shifts of a large number of elements need to be appropriately set, which is challenging. Also, these optimal phase-shifts depend on the location of the receivers, which could be unknown. In this work, we develop a learning algorithm using a {\it fixed-budget multi-armed bandit framework} to beamform and maximize received signal strength at the receiver for far-field regions. Our algorithm, named \Algo exploits the parametric form of channel gains of the beams, which can be expressed in terms of two {\it phase-shifting parameters}. Even after parameterization, the problem is still challenging as phase-shifting parameters take continuous values. To overcome this, {\it\HB} works with the discrete values of phase-shifting parameters and exploits their unimodal relations with channel gains to learn the optimal values faster. We upper bound the probability of {\it\HB} incorrectly identifying the (discrete) optimal phase-shift parameters in terms of the number of pilots used in learning. We show that this probability decays exponentially with the number of pilot signals. We demonstrate that {\it\HB} outperforms state-of-the-art algorithms through extensive simulations.

We present a new method for generating emission spectra from polycyclic aromatic hydrocarbons (PAHs) in arbitrary radiation fields. We utilize the single-photon limit for PAH heating and emission to treat individual photon absorptions as independent events. This allows the construction of a set of single-photon emission "basis spectra" that can be scaled to produce an output emission spectrum given any input heating spectrum. We find that this method produces agreement with PAH emission spectra computed accounting for multi-photon effects to within simeq10% in the 3-20~{rm mu m} wavelength range for radiation fields with intensity U<100. We use this framework to explore the dependence of PAH band ratios on the radiation field spectrum across grain sizes, finding in particular a strong dependence of the 3.3 to 11.2~mum band ratio on radiation field hardness. A Python-based tool and a set of basis spectra that can be used to generate these emission spectra are made publicly available.

The wavelength-coverage and sensitivity of JWST now enables us to probe the rest-frame UV - optical spectral energy distributions (SEDs) of galaxies at high-redshift (z>4). From these SEDs it is, in principle, through SED fitting possible to infer key physical properties, including stellar masses, star formation rates, and dust attenuation. These in turn can be compared with the predictions of galaxy formation simulations allowing us to validate and refine the incorporated physics. However, the inference of physical properties, particularly from photometry alone, can lead to large uncertainties and potential biases. Instead, it is now possible, and common, for simulations to be forward-modelled to yield synthetic observations that can be compared directly to real observations. In this work, we measure the JWST broadband fluxes and colours of a robust sample of 5<z<10 galaxies using the Cosmic Evolution Early Release Science (CEERS) Survey. We then analyse predictions from a variety of models using the same methodology and compare the NIRCam/F277W magnitude distribution and NIRCam colours with observations. We find that the predicted and observed magnitude distributions are similar, at least at 5<z<8. At z>8 the distributions differ somewhat, though our observed sample size is small and thus susceptible to statistical fluctuations. Likewise, the predicted and observed colour evolution show broad agreement, at least at 5<z<8. There is however some disagreement between the observed and modelled strength of the strong line contribution. In particular all the models fails to reproduce the F410M-F444W colour at z>8, though, again, the sample size is small here.

Using the First Light And Reionisation Epoch Simulations ({rm F{small LARES}}), a suite of hydrodynamical simulations we explore the consequences of a realistic model for star--dust geometry on the observed properties of galaxies. We find that the UV attenuation declines rapidly from the central regions of galaxies, and bright galaxies have spatially extended star formation that suffers less obscuration than their fainter counterparts, demonstrating a non-linear relationship between the UV luminosity and the UV attenuation, giving a double power-law shape to the UVLF. Spatially distinct stellar populations within galaxies experience a wide range of dust attenuation due to variations in the dust optical depth along their line-of-sight; which can range from completely dust obscured to being fully unobscured. The overall attenuation curve of a galaxy is then a complex combination of various lines-of-sight within the galaxy. We explore the manifestation of this effect to study the reliability of line ratios to infer galaxy properties, in particular the Balmer decrement and the BPT diagram. We find the Balmer decrement predicted Balmer line attenuation to be higher (factor of 1 to gtrsim10) than expected from commonly used attenuation curves. The observed BPT line ratios deviate from their intrinsic values (median difference of 0.08 (0.02) and standard deviation of 0.2 (0.05) for log_{10}([N{small II}]lambda 6585/H_{alpha}) (log_{10}([O{small III}]lambda 5008/H_{beta})). Finally, we explore the variation in observed properties (UV attenuation, UV slope and Balmer decrement) with viewing angle, finding average differences of sim0.3 magnitudes in the UV attenuation.

We use four observations with the European VLBI network to measure the first precise radio parallax of the Crab Pulsar. We found two in-beam extragalactic sources just outside the Crab Nebula, with one bright enough to use as a background reference source in our data. We use the Crab Pulsar's giant pulses to determine fringe and bandpass calibration solutions, which greatly improved the sensitivity and reliability of our images and allowed us to determine precise positional offsets between the pulsar and the background source. From those offsets, we determine a parallax of π=0.53pm0.06;mas and proper motion of (μ_α,μ_δ)=(-11.34pm0.06,2.65pm0.14);mas;yr^{-1}, yielding a distance of d=1.90^{+0.22}_{-0.18};kpc and transverse velocity of v_{perp}=104^{+13}_{-11};km;s^{-1}. These results are consistent with the Gaia 3 measurements, and open up the possibility of far more accurate astrometry with further VLBI observations.

Understanding how nano- or micro-scale structures and material properties can be optimally configured to attain specific functionalities remains a fundamental challenge. Photonic metasurfaces, for instance, can be spectrally tuned through material choice and structural geometry to achieve unique optical responses. However, existing numerical design methods require prior identification of specific material-structure combinations, or device classes, as the starting point for optimization. As such, a unified solution that simultaneously optimizes across materials and geometries has yet to be realized. To overcome these challenges, we present a global deep learning-based inverse design framework, where a conditional deep convolutional generative adversarial network is trained on colored images encoded with a range of material and structural parameters, including refractive index, plasma frequency, and geometric design. We demonstrate that, in response to target absorption spectra, the network can identify an effective metasurface in terms of its class, materials properties, and overall shape. Furthermore, the model can arrive at multiple design variants with distinct materials and structures that present nearly identical absorption spectra. Our proposed framework is thus an important step towards global photonics and materials design strategies that can identify combinations of device categories, material properties, and geometric parameters which algorithmically deliver a sought functionality.

The Kramers-Kronig relations are a pivotal foundation of linear optics and atomic physics, embedding a physical connection between the real and imaginary components of any causal response function. A mathematically equivalent, but simpler, approach instead utilises the Hilbert transform. In a previous study, the Hilbert transform was applied to absorption spectra in order to infer the sole refractive index of an atomic medium in the absence of an external magnetic field. The presence of a magnetic field causes the medium to become birefringent and dichroic, and therefore it is instead characterised by two refractive indices. In this study, we apply the same Hilbert transform technique to independently measure both refractive indices of a birefringent atomic medium, leading to an indirect measurement of atomic magneto-optical rotation. Key to this measurement is the insight that inputting specific light polarisations into an atomic medium induces absorption associated with only one of the refractive indices. We show this is true in two configurations, commonly referred to in literature as the Faraday and Voigt geometries, which differ by the magnetic field orientation with respect to the light wavevector. For both cases, we measure the two refractive indices independently for a Rb thermal vapour in a 0.6 T magnetic field, finding excellent agreement with theory. This study further emphasises the application of the Hilbert transform to the field of quantum and atomic optics in the linear regime.

The out-of-band energy loss caused by in-built color filters significantly degrades the signal-to-noise ratio and the dynamic range of conventional image sensors, which has restricted the attempt to develop ultrahigh-density imaging devices by merely shrinking the pixel size. This issue will be more serious for security cameras which need to collect visible (VIS) light and near-infrared (NIR) photons as well. The existing solutions mostly explore complex photonic nanostructures, which are often too complicated for production. In this work, we demonstrate a pixel-scale spectral router utilizing two-dimensional (2D) Si3N4 Mie scattering metagratings that can spatially divide NIR (850 nm) and VIS (400-700 nm) light to different pixels at high efficiencies. It has a minimum feature size larger than 360 nm, highly promising for massive production. Compared with the traditional filter design, our router can gain about 42% and 30% signal enhancement for NIR and VIS band, respectively. We show that it also has good polarization insensitivity and incident angle tolerance. The NIR-VIS simultaneous imaging is inspected without any complex reconstruction algorithm. Mode analysis indicates that the multipolar scattering of our Mie-type metagratings provides the necessary degrees of freedom to spatially optimize the routing functions for broadband photons.

The exact location of the gamma-ray emitting region in blazar jets has long been a matter of debate. However, the location has important implications about the emission processes, geometric and physical parameters of the jet, as well as the nature of interaction of the jet with the interstellar and intergalactic medium. Diverse conclusions have been drawn by various authors based on a variety of methods applied to different data sets of many blazars, e.g., the location is less than 0.1 pc from the central engine within the broad line region (BLR) or a few or tens of pc downstream beyond the dusty torus or at some intermediate distance. Here we use a method, established in a previous work, in which the location of the GeV/optical emission is determined using the ratio of energy dissipated during contemporaneous outbursts at those wave bands. We apply it to a total of 47 multi-wavelength outbursts in 10 blazars. We find that the location of the GeV/optical emission is beyond the BLR for all cases. This result is consistent with other studies, in which the location has been determined for a large sample of blazars. We compare the location determined by our method for several GeV outbursts of multiple blazars to that obtained by other authors using different methods. We find that our results are consistent in such one-to-one comparison in most cases, for which the required data were available.

We present an extragalactic HI 21-cm absorption lines catalog from a blind search at z leqslant 0.35, using drift-scan data collected in 1325.6 hours by the ongoing Commensal Radio Astronomy FasT Survey (CRAFTS) and FAST All Sky HI Survey (FASHI), which spans a sky area of 6072.0 deg^{2} and covers 84533 radio sources with a flux density greater than 12 mJy. 14 previously identified HI absorbers and 20 newly discovered HI absorbers were detected, comprising 15 associated systems, 10 intervening systems, and 9 systems with undetermined classifications. Through spectral stacking, the mean peak optical path, mean velocity-integrated optical path, mean FWHM and mean HI column density are measured to be 0.47 and 0.30; 27.19 and 4.36 km s^{-1}; 42.61 and 9.33 km s^{-1}; 0.49 and 0.08 T_{s} times 10^{20}cm^{-2}K^{-1}, for the associated and intervening samples, respectively. Statistical analysis also reveals that associated systems tend to be hosted by red (g-r>0.7) galaxies at lower redshifts, whereas galaxies hosting intervening HI absorption are typically found at higher redshifts and are of a bluer (g-rleqslant0.7) type. A noticeable difference is observed in the positions of foregrounds, backgrounds of intervening systems, and high-redshift and low-redshift associated systems on the WISE color-color diagram. All identified foreground sources in our sample have W1-W2 magnitudes below 0.8, suggesting no Active Galactic Nuclei (AGN). In contrast, backgrounds of intervening systems tend to have W1-W2 magnitudes above 0.8, indicating AGN presence. For associated absorption, most low-redshift (zleqslant0.5) systems show W1-W2 values below 0.8, while higher-redshift associated absorption (z>0.5) displays a broader range of W1-W2 values.

The illumination of the accretion disks is frequently studied assuming that the incident X-ray flux is a point-like source. The approach is referred as lamppost model.The most recent computations of the X-ray reprocessing by the disk take into account the departure from the simple lamppost models. However, in computations of the incident flux thermalization and subsequent re-emission in the optical-UV band the lamppost approximation is most frequently assumed. We test if the UV-optical reverberation mapping and time delay measurements are sensitive to this assumption. We assume that the incident radiation originates from a region extended along the symmetry axis. To model this, we adopt a simple setup by representing the emission as two lamps irradiating the disk simultaneously from two different heights. We then compare the resulting predictions with those obtained for a single lamppost located at an intermediate height. We show at the basis of the transfer function that the deviation of the wavelength-dependent delay curve shows at most a difference of 20% in comparison to a single lamppost, assuming the black hole mass of 10^8 M_{odot}, Eddington ratio 1, and the location of the lamps at 5 and 100 rg. The maximum deviation happens for the lamp luminosity ratio sim3. When simulating light curves for a two-lamp setup and a standard lamppost with the same black hole mass and a sampling rate of 0.1 days, we find no measurable differences in the ICCF profiles between the two setups. Larger black hole mass and considerably lower Eddington ratio would allow to see larger differences between a single lamppost and a two-lampost model. UV/optical reverberation mapping is not very sensitive to the vertical extension of the corona.

This paper concerns the derivation of radiative transfer equations for acoustic waves propagating in a randomly fluctuating slab (between two parallel planes) in the weak-scattering regime, and the study of boundary effects through an asymptotic analysis of the Wigner transform of the wave solution. These radiative transfer equations allow to model the transport of wave energy density, taking into account the scattering by random heterogeneities. The approach builds on the method of images, where the slab is extended to a full-space, with a periodic map of mechanical properties and a series of sources located along a periodic pattern. Two types of boundary effects, both on the (small) scale of the wavelength, are observed: one at the boundaries of the slab, and one inside the domain. The former impact the entire energy density (coherent as well as incoherent) and is also observed in half-spaces. The latter, more specific to slabs, corresponds to the constructive interference of waves that have reflected at least twice on the boundaries of the slab and only impacts the coherent part of the energy density.

Fiber Fabry--Perot (FFP) resonators of a few centimeters are optimized as a function of the reflectivity of the mirrors and the dimensions of the intra-cavity waveguide. Loaded quality factor in excess of 10^9, with an optimum of 4___x___10^9, together with an intrinsic quality factor larger than 10^10 and intrinsic finesse in the range of 10^5 have been measured. An application to the stabilization of laser frequency fluctuations is presented.

A stochastic gravitational wave background causes the apparent positions of distant sources to fluctuate, with angular deflections of order the characteristic strain amplitude of the gravitational waves. These fluctuations may be detectable with high precision astrometry, as first suggested by Braginsky et al. in 1990. Several researchers have made order of magnitude estimates of the upper limits obtainable on the gravitational wave spectrum \Omega_gw(f), at frequencies of order f ~ 1 yr^-1, both for the future space-based optical interferometry missions GAIA and SIM, and for VLBI interferometry in radio wavelengths with the SKA. For GAIA, tracking N ~ 10^6 quasars over a time of T ~ 1 yr with an angular accuracy of \Delta \theta ~ 10 \mu as would yield a sensitivity level of \Omega_gw ~ (\Delta \theta)^2/(N T^2 H_0^2) ~ 10^-6, which would be comparable with pulsar timing. In this paper we take a first step toward firming up these estimates by computing in detail the statistical properties of the angular deflections caused by a stochastic background. We compute analytically the two point correlation function of the deflections on the sphere, and the spectrum as a function of frequency and angular scale. The fluctuations are concentrated at low frequencies (for a scale invariant stochastic background), and at large angular scales, starting with the quadrupole. The magnetic-type and electric-type pieces of the fluctuations have equal amounts of power.

Radio continuum and radio recombination line observations of the inner degree of the galactic center reveal a rich collection of thermal and nonthermal radio structures: (a) A network of linear filaments that are oriented perpendicular to the galactic plane constitute the major portion of the radio Arc at l~ 0.2{\deg}. These filaments have nonthermal characteristics, show polarized emission at 6, 3 and 2 cm, are organized over a 100 pc scale, and have a flat spectrum. (b) A number of thread-like filaments are situated asymmetrical with respect to the galactic plane and appear to be isolated unlike the linear filaments which are grouped together. The polarization and spectra of these so called "threads" are not yet known. (c) A network of arched filamentary structures that is disorganized in its appearance constitutes the curved portion of the Arc. Radio recombination line emission from these filaments indicates a thermal character for the emission. (d) A very steep-spectrum ridge of emission is seen to emerge from Sgr A. (e) The relative location of Sgr A East, West, a cluster of HII regions and the 50 km/s molecular cloud are discussed. Comparisons of the low and high-frequency maps show clearly that Sgr A East lies behind Sgr A West.

Recent advances in photonic optimization have enabled calculation of performance bounds for a wide range of electromagnetic objectives, albeit restricted to single-material systems. Motivated by growing theoretical interest and fabrication advances, we present a framework to bound the performance of photonic heterostructures and apply it to investigate maximum absorption characteristics of multilayer films and compact, free-form multi-material scatterers. Limits predict trends seen in topology-optimized geometries -- often coming within factors of two of specific designs -- and may be exploited in conjunction with inverse designs to predict when heterostructures are expected to outperform their optimal single-material counterparts.

Subwavelength atomic lattices have emerged as a promising platform for quantum applications, leveraging collective superradiant and subradiant effects to enhance light-matter interactions. Integrating atomic lattices into nanostructures is at the front of effort toward any application with atomic lattices, but is still a challenging theoretical task, as the dipole interactions are hard to model in arbitrary dielectric environment. Here, we develop a formalism that allows the embedding of emitters to a wide class of thin curved waveguides, by greatly simplifying the wave equation and consequentially the dipole interactions. We demonstrate the formalism for locally constant positive curved surfaces, where we derive a new surface Green function that allows exact computation of the collective superradiant and subradiant states. We also show how the curvature and the thickness of the waveguides affects the collective states through an effective surface wavelength.

An experimental demonstration of directivities exceeding the fundamental Kildal limit, a phenomenon called superdirectivity, is provided for spherical high-index dielectric antennas with an electric dipole excitation. A directivity factor of about 10 with a total efficiency of more than 80\% for an antenna having a size of a third of the wavelength was measured. High directivities are shown to be associated with constructive interference of particular electric and magnetic modes of an open spherical resonator. Both analytic solution for a point dipole and a full-wave rigorous simulation for a realistic dipole antenna were employed for optimization and analysis, yielding an excellent agreement between experimentally measured and numerically predicted directivities. The use of high-index low-loss ceramics can significantly reduce the physical size of such antennas while maintaining their overall high radiation efficiency. Such antennas can be attractive for various high-frequency applications, such as antennas for the Internet of things, smart city systems, 5G network systems, and others. The demonstrated concept can be scaled in frequency.

Image datasets are essential not only in validating existing methods in computer vision but also in developing new methods. Most existing image datasets focus on trichromatic intensity images to mimic human vision. However, polarization and spectrum, the wave properties of light that animals in harsh environments and with limited brain capacity often rely on, remain underrepresented in existing datasets. Although spectro-polarimetric datasets exist, these datasets have insufficient object diversity, limited illumination conditions, linear-only polarization data, and inadequate image count. Here, we introduce two spectro-polarimetric datasets: trichromatic Stokes images and hyperspectral Stokes images. These novel datasets encompass both linear and circular polarization; they introduce multiple spectral channels; and they feature a broad selection of real-world scenes. With our dataset in hand, we analyze the spectro-polarimetric image statistics, develop efficient representations of such high-dimensional data, and evaluate spectral dependency of shape-from-polarization methods. As such, the proposed dataset promises a foundation for data-driven spectro-polarimetric imaging and vision research. Dataset and code will be publicly available.

We use the First Light And Reionisation Epoch Simulations (FLARES) to study the evolution of the rest-frame ultraviolet (UV) and far-infrared (FIR) sizes for a statistical sample of massive (gtrsim10^{9}M_{odot}) high redshift galaxies (z in [5,10]). Galaxies are post-processed using the SKIRT radiative transfer code, to self-consistently obtain the full spectral energy distribution and surface brightness distribution. We create mock observations of the galaxies for the Near Infrared Camera (NIRCam) to study the rest-frame UV 1500 xC5 morphology. We also generate mock rest-frame FIR (50 mum) photometry and mock ALMA (158 mum) (0.01"-0.03" and approx0.3" angular resolution) observations to study the dust-continuum. We find the effect of dust on observed sizes reduces with increasing wavelength from the UV to optical (sim0.6 times the UV at 0.4mum), with no evolution in FIR sizes. Observed sizes vary within 0.4-1.2 times the intrinsic sizes at different signal to noise ratios (SNR = 5-20) across redshifts. The effect of PSF and noise makes bright structures prominent, whereas fainter regions blend with noise, leading to an underestimation (factor of 0.4-0.8) of sizes at SNR=5. At SNR=15-20, the underestimation reduces (factor of 0.6-0.9) at z=5-8 but due to PSF, at z=9-10, bright cores are dominant, resulting in an overestimation (factor of 1.0-1.2). For ALMA, low resolution sizes are effected by noise which acts as extended emission. The size evolution in UV broadly agrees with current observational samples and other simulations. This work is one of the first to analyse the panchromatic sizes of a statistically significant sample of simulated high-redshift galaxies, complementing a growing body of research highlighting the importance of conducting an equivalent comparison between observed galaxies and their simulated counterparts in the early Universe.

In recent years, the demand for hyperspectral imaging devices has grown significantly, driven by their ability of capturing high-resolution spectral information. Among the several possible optical designs for acquiring hyperspectral images, there is a growing interest in interferometric spectral imaging systems based on division of aperture. These systems have the advantage of capturing snapshot acquisitions while maintaining a compact design. However, they require a careful calibration to operate properly. In this work, we present the interferometer response characterization algorithm (IRCA), a robust three-step procedure designed to characterize the transmittance response of multi-aperture imaging spectrometers based on the interferometry of Fabry-Perot. Additionally, we propose a formulation of the image formation model for such devices suitable to estimate the parameters of interest by considering the model under various regimes of finesse. The proposed algorithm processes the image output obtained from a set of monochromatic light sources and refines the results using nonlinear regression after an ad-hoc initialization. Through experimental analysis conducted on four different prototypes from the Image SPectrometer On Chip (ImSPOC) family, we validate the performance of our approach for characterization. The associated source code for this paper is available at https://github.com/danaroth83/irca.

The binding energies of the five bound rotational levels J=0-4 in the highest vibrational level v=14 in the X^1Sigma_g^+ ground electronic state of H_2 were measured in a three-step ultraviolet-laser experiment. Two-photon UV-photolysis of H_2S produced population in these high-lying bound states, that were subsequently interrogated at high precision via Doppler-free spectroscopy of the F^1Sigma_g^+ - X^1Sigma_g^+ system. A third UV-laser was used for detection through auto-ionizing resonances. The experimentally determined binding energies were found to be in excellent agreement with calculations based on non-adiabatic perturbation theory, also including relativistic and quantum electrodynamical contributions. The s-wave scattering length of the H + H system is derived from the binding energy of the last bound J=0 level via a direct semi-empirical approach, yielding a value of a_s = 0.2724(5) a_0, in good agreement with a result from a previously followed theoretical approach. The subtle effect of the malpha^4 relativity contribution to a_s was found to be significant. In a similar manner a value for the p-wave scattering volume is determined via the J=1 binding energy yielding a_p = -134.0000(6) a_0^3. The binding energy of the last bound state in H_2, the (v=14, J=4) level, is determined at 0.023(4) cm^{-1}, in good agreement with calculation. The effect of the hyperfine substructure caused by the two hydrogen atoms at large internuclear separation, giving rise to three distinct dissociation limits, is discussed.

A sample of 60,410 bona fide optical quasars with astrometric proper motions in Gaia EDR3 and spectroscopic redshifts above 0.5 in an oval 8400 square degree area of the sky is constructed. Using orthogonal Zernike functions of polar coordinates, the proper motion fields are fitted in a weighted least-squares adjustment of the entire sample and of six equal bins of sorted redshifts. The overall fit with 37 Zernike functions reveals a statistically significant pattern, which is likely to be of instrumental origin. The main feature of this pattern is a chain of peaks and dips mostly in the R.A. component with an amplitude of 25~muas yr^{-1}. This field is subtracted from each of the six analogous fits for quasars grouped by redshifts covering the range 0.5 through 7.03, with median values 0.72, 1.00, 1.25, 1.52, 1.83, 2.34. The resulting residual patterns are noisier, with formal uncertainties up to 8~muas yr^{-1} in the central part of the area. We detect a single high-confidence Zernike term for R.A. proper motion components of quasars with redshifts around 1.52 representing a general gradient of 30 muas yr^{-1} over 150degr on the sky. We do not find any small- or medium-scale systemic variations of the residual proper motion field as functions of redshift above the 2.5,sigma significance level.

The statistical power of weak lensing measurements is principally driven by the number of high redshift galaxies whose shapes are resolved. Conventional wisdom and physical intuition suggest this is optimised by deep imaging at long (red or near IR) wavelengths, to avoid losing redshifted Balmer break and Lyman break galaxies. We use the synthetic Emission Line EL-COSMOS catalogue to simulate lensing observations using different filters, from various altitudes. Here were predict the number of exposures to achieve a target z > 0.3 source density, using off-the-shelf and custom filters. Ground-based observations are easily better at red wavelengths, as (more narrowly) are space-based observations. However, we find that SuperBIT, a diffraction-limited observatory operating in the stratosphere, should instead perform its lensing-quality observations at blue wavelengths.

Recent space-borne and ground-based observations provide photometric measurements as time series. The effect of interstellar dust extinction in the near-infrared range is only 10% of that measured in the V band. However, the sensitivity of the light curve shape to the physical parameters in the near-infrared is much lower. So, interpreting these types of data sets requires new approaches like the different large-scale surveys, which create similar problems with big data. Using a selected data set, we provide a method for applying routines implemented in R to extract most information of measurements to determine physical parameters, which can also be used in automatic classification schemes and pipeline processing. We made a multivariate classification of 131 Cepheid light curves (LC) in J, H, and K colors, where all the LCs were represented in 20D parameter space in these colors separately. Performing a Principal Component Analysis (PCA), we got an orthogonal coordinate system and squared Euclidean distances between LCs, with 6 significant eigenvalues, reducing the 20-dimension to 6. We also estimated the optimal number of partitions of similar objects and found it to be equal to 7 in each color; their dependence on the period, absolute magnitude, amplitude, and metallicity are also discussed. We computed the Spearman rank correlations, showing that periods and absolute magnitudes correlate with the first three PCs significantly. The first two PC are also found to have a relationship with the amplitude, but the metallicity effects are only marginal. The method shown can be generalized and implemented in unsupervised classification schemes and analysis of mixed and biased samples. The analysis of our Classical Cepheid near-infrared LC sample showed that the J, H, K curves are insufficient for determination of stellar metallicity, with mass being the key factor shaping them.

Forthcoming space-based gravitational-wave (GW) detectors will employ second-generation time-delay interferometry (TDI) to suppress laser frequency noise and achieve the sensitivity required for GW detection. We introduce an inverse light-path operator P_{i_{1}i_{2}i_{3}ldots i_{n-1}i_{n}}, which enables simple representation of second-generation TDI combinations and a concise description of light propagation. Analytical expressions and high-accuracy approximate formulas are derived for the sky- and polarization-averaged response functions, noise power spectral densities (PSDs), and sensitivity curves of TDI Michelson, (alpha,beta,gamma), Monitor, Beacon, Relay, and Sagnac combinations, as well as their orthogonal A, E, T channels. Our results show that: (i) second-generation TDIs have the same sensitivities as their first-generation counterparts; (ii) the A, E, T sensitivities and the optimal sensitivity are independent of the TDI generation and specific combination; (iii) the A and E channels have equal averaged responses, noise PSDs, and sensitivities, while the T channel has much weaker response and sensitivity at low frequencies (2pi fL/clesssim3); (iv) except for the (alpha,beta,gamma) and zeta combinations and the T channel, all sensitivity curves exhibit a flat section in the range f_{n}<flesssim 1.5/(2pi L/c), where the noise-balance frequency f_{n} separates the proof-mass- and optical-path-dominated regimes, while the response-transition frequency sim 1.5/(2pi L/c) separates the response function's low- and high-frequency behaviors; (v) the averaged response, noise PSD, and sensitivity of zeta scales with those of the T channel. These analytical and approximate formulations provide useful benchmarks for instrument optimization and data-analysis studies for future space-based GW detectors.

We show that pairs of widely separated interferometers are advantageous for measuring the Stokes parameter V of a stochastic background of gravitational waves. This parameter characterizes asymmetry of amplitudes of right- and left-handed waves and generation of the asymmetry is closely related to parity violation in the early universe. The advantageous pairs include LIGO(Livingston)-LCGT and AIGO-Virgo that are relatively insensitive to Omega_GW (the simple intensity of the background). Using at least three detectors, information of the intensity Omega_GW and the degree of asymmetry V can be separately measured.

An electro-optic modulator offers the function of modulating the propagation of light in a material with electric field and enables seamless connection between electronics-based computing and photonics-based communication. The search for materials with large electro-optic coefficients and low optical loss is critical to increase the efficiency and minimize the size of electro-optic devices. We present a semi-empirical method to compute the electro-optic coefficients of ferroelectric materials by combining first-principles density-functional theory calculations with Landau-Devonshire phenomenological modeling. We apply the method to study the electro-optic constants, also called Pockels coefficients, of three paradigmatic ferroelectric oxides: BaTiO3, LiNbO3, and LiTaO3. We present their temperature-, frequency- and strain-dependent electro-optic tensors calculated using our method. The predicted electro-optic constants agree with the experimental results, where available, and provide benchmarks for experimental verification.

We describe the design and performance of the near-infrared (1.51--1.70 micron), fiber-fed, multi-object (300 fibers), high resolution (R = lambda/delta lambda ~ 22,500) spectrograph built for the Apache Point Observatory Galactic Evolution Experiment (APOGEE). APOGEE is a survey of ~ 10^5 red giant stars that systematically sampled all Milky Way populations (bulge, disk, and halo) to study the Galaxy's chemical and kinematical history. It was part of the Sloan Digital Sky Survey III (SDSS-III) from 2011 -- 2014 using the 2.5 m Sloan Foundation Telescope at Apache Point Observatory, New Mexico. The APOGEE-2 survey is now using the spectrograph as part of SDSS-IV, as well as a second spectrograph, a close copy of the first, operating at the 2.5 m du Pont Telescope at Las Campanas Observatory in Chile. Although several fiber-fed, multi-object, high resolution spectrographs have been built for visual wavelength spectroscopy, the APOGEE spectrograph is one of the first such instruments built for observations in the near-infrared. The instrument's successful development was enabled by several key innovations, including a "gang connector" to allow simultaneous connections of 300 fibers; hermetically sealed feedthroughs to allow fibers to pass through the cryostat wall continuously; the first cryogenically deployed mosaic volume phase holographic grating; and a large refractive camera that includes mono-crystalline silicon and fused silica elements with diameters as large as ~ 400 mm. This paper contains a comprehensive description of all aspects of the instrument including the fiber system, optics and opto-mechanics, detector arrays, mechanics and cryogenics, instrument control, calibration system, optical performance and stability, lessons learned, and design changes for the second instrument.

We present final natural system optical (ugriBV) and near-infrared (YJH) photometry of 134 supernovae (SNe) with probable white dwarf progenitors that were observed in 2004-2009 as part of the first stage of the Carnegie Supernova Project (CSP-I). The sample consists of 123 Type Ia SNe, 5 Type Iax SNe, 2 super-Chandrasekhar SN candidates, 2 Type Ia SNe interacting with circumstellar matter, and 2 SN 2006bt-like events. The redshifts of the objects range from z = 0.0037 to 0.0835; the median redshift is 0.0241. For 120 (90%) of these SNe, near-infrared photometry was obtained. Average optical extinction coefficients and color terms are derived and demonstrated to be stable during the five CSP-I observing campaigns. Measurements of the CSP-I near-infrared bandpasses are also described, and near-infrared color terms are estimated through synthetic photometry of stellar atmosphere models. Optical and near-infrared magnitudes of local sequences of tertiary standard stars for each supernova are given, and a new calibration of Y-band magnitudes of the Persson et al. (1998) standards in the CSP-I natural system is presented.

We have examined the distribution of the position angle (PA) of the Galactic center filaments with lengths L > 66'' and < 66'' as well as their length distribution as a function of PA. We find bimodal PA distributions of the filaments, long and short populations of radio filaments. Our PA study shows the evidence for a distinct population of short filaments with PA close to the Galactic plane. Mainly thermal short radio filaments (<66'') have PAs concentrated close to the Galactic plane within 60^circ < rm PA <120^circ. Remarkably, the short filament PAs are radial with respect to the Galactic center at l <0^circ, and extend in the direction toward Sgr A*. On a smaller scale, the prominent Sgr E HII complex G358.7-0.0 provides a vivid example of the nearly radial distribution of short filaments. The bimodal PA distribution suggests different origin for two distinct filament populations. We argue that alignment of the short filament population results from the ram pressure of a degree-scale outflow from Sgr A* that exceeds the internal filament pressure, and aligns them along the Galactic plane. The ram pressure is estimated to be 2times10^6, cm^{-3}, K at a distance of 300pc, requiring biconical mass outflow rate 10^{-4} \msol\, yr^{-1} with an opening angle of sim40^circ. This outflow aligns not only the magnetized filaments along the Galactic plane but also accelerates thermal material associated with embedded or partially embedded clouds. This places an estimate of sim6 Myr as the age of the outflow.

With the advent of new spectroscopic surveys from ground and space, observing up to hundreds of millions of galaxies, spectra classification will become overwhelming for standard analysis techniques. To prepare for this challenge, we introduce a family of deep learning tools to classify features in one-dimensional spectra. As the first application of these Galaxy Spectra neural Networks (GaSNets), we focus on tools specialized at identifying emission lines from strongly lensed star-forming galaxies in the eBOSS spectra. We first discuss the training and testing of these networks and define a threshold probability, PL, of 95% for the high quality event detection. Then, using a previous set of spectroscopically selected strong lenses from eBOSS, confirmed with HST, we estimate a completeness of ~80% as the fraction of lenses recovered above the adopted PL. We finally apply the GaSNets to ~1.3M spectra to collect a first list of ~430 new high quality candidates identified with deep learning applied to spectroscopy and visually graded as highly probable real events. A preliminary check against ground-based observations tentatively shows that this sample has a confirmation rate of 38%, in line with previous samples selected with standard (no deep learning) classification tools and follow-up by Hubble Space Telescope. This first test shows that machine learning can be efficiently extended to feature recognition in the wavelength space, which will be crucial for future surveys like 4MOST, DESI, Euclid, and the Chinese Space Station Telescope (CSST).

Channel Charting (CC) has emerged as a promising framework for data-driven radio localization, yet existing approaches often struggle to scale globally and to handle the distortions introduced by non-line-of-sight (NLoS) conditions. In this work, we propose a novel CC method that leverages Channel Impulse Response (CIR) data enriched with practical features such as Time Difference of Arrival (TDoA) and Transmission Reception Point (TRP) locations, enabling a self-supervised localization function on a global scale. The proposed framework is further enhanced with short-interval User Equipment (UE) displacement measurements, which improve the continuity and robustness of the learned positioning function. Our algorithm incorporates a mechanism to identify and mask NLoS-induced noisy measurements, leading to significant performance gains. We present the evaluations of our proposed models in a real 5G testbed and benchmarked against centimeter-accurate Real-Time Kinematic (RTK) positioning, in an O-RAN--based 5G network by OpenAirInterface (OAI) software at EURECOM. It demonstrated outperforming results against the state-of-the-art semi-supervised and self-supervised CC approaches in a real-world scenario. The results show localization accuracies of 2-4 meters in 90% of cases, across a range of NLoS ratios. Furthermore, we provide public datasets of CIR recordings, along with the true position labels used in this paper's evaluation.

We study lensing of gravitational waves by a black hole in the deep wave optics regime, i.e. when the wavelength is much larger than the black hole Schwarzschild radius. We apply it to triple systems, with a binary of stellar mass objects in the inspiraling phase orbiting around a central massive black hole. We describe the full polarisation structure of the wave and derive predictions for the polarisation modes of the scattered wave measured by the observer. We show that lensing in the wave optics regime is not helicity preserving, as opposed to lensing in the geometric optics regime. The amplitude of the total wave is modulated due to interference between the directly transmitted and lensed components. The relative amplitude of the modulation is fixed by the lensing geometry and can reach unity in the most favourable settings. This indicates that wave optics lensing is potentially detectable by LISA for sufficiently high SNR systems. Our findings show that in the wave optics regime it is necessary to go beyond the usual lensing description where the amplification factor is assumed to be the same for both helicity modes. While motivated by GW190521 and the AGN formation scenario, our results apply more broadly to stellar-mass binaries orbiting a third body described as a Schwarzschild black hole, with a period comparable to the GW observation time.

The prompt emission of gamma-ray bursts (GRBs) is supposed to be released from the relativistic jet launched from the central engine. Apart from the non-thermal nature of the spectra in a majority of GRBs, there is evidence for the presence of quasi-thermal components in the prompt emission of a few GRBs according to observations by Fermi satellite. On the other hand, the GRB jet has been revealed as structured in recent research. The theoretical observed spectra of photosphere emissions by an off-axis observer and the dependence of the spectra on the viewing angle under the assumption of structured jets remain unexplored. In this paper, we numerically calculate the instantaneous photosphere spectra by different viewing angles from a structured jet, from which relevant temporal and spectral characteristics are derived. Moreover, we address the necessity of proper treatment of the outflow boundary in the photosphere emission scenario. Furthermore, our calculations suggest that the Einstein Probe and Space-based multi-band astronomical Variable Object Monitor will have the capability to detect the short GRBs similar to GRB 170817A up to a luminosity distance of 200Mpc if the off-axis viewing angle is less than 10 degrees.

We present constraints on the spacetime variation of the fine-structure constant alpha at redshifts 2.5le z<9.5 using JWST emission-line galaxies. The galaxy sample consists of 621 high-quality spectra with strong and narrow [O III] lambdalambda4959,5007 doublet emission lines from 578 galaxies, including 232 spectra at z>5. The [O III] doublet lines are arguably the best emission lines to probe the variation in alpha. We divide our sample into six subsamples based on redshift and calculate the relative variation Deltaalpha/alpha for the individual subsamples. The calculated Deltaalpha/alpha values are consistent with zero within 1sigma at all redshifts, suggesting no time variation in alpha above a level of (1-2) times10^{-4} (1sigma) in the past 13.2 billion years. When the whole sample is combined, the constraint is improved to be Deltaalpha/alpha = (0.2pm0.7) times10^{-4}. We further test the spatial variation in alpha using four subsamples of galaxies in four different directions on the sky. The measured Deltaalpha/alpha values are consistent with zero at a 1sigma level of sim 2times10^{-4}. While the constraints in this work are not as stringent as those from lower-redshift quasar absorption lines in previous studies, this work uses an independent tracer and provides the first constraints on Deltaalpha/alpha at the highest redshifts. With the growing number of emission-line galaxies from JWST, we expect to achieve stronger constraints in the future.

Wavefront shaping is a technique for directing light through turbid media. The theoretical aspects of wavefront shaping are well understood, and under near-ideal experimental conditions, accurate predictions for the expected signal enhancement can be given. In practice, however, there are many experimental factors that negatively affect the outcome of the experiment. Here, we present a comprehensive overview of these experimental factors, including the effect of sample scattering properties, noise, and response of the spatial light modulator. We present simple means to identify experimental imperfections and to minimize their negative effect on the outcome of the experiment. This paper is accompanied by Python code for automatically quantifying experimental problems using the OpenWFS framework for running and simulating wavefront shaping experiments.

The inverse problem of multilayer thin-film optical coatings design represents a complex combinatorial-continuous optimization challenge. We present PRISM (Position-encoded Regressive Inverse Spectral Model), a unified decoder-only autoregressive transformer that streamlines this process by jointly predicting discrete material selection and continuous thickness regression within a single backbone. PRISM introduces two primary architectural innovations: (1) spectrum prefix conditioning, which utilizes standard prefix tokens for in-context target injection, and (2) cumulative-depth Rotary Position Embeddings, which encode continuous thickness directly into the positional representation to preserve the physical spatial relationships of the stack. Our benchmarks demonstrate that a PRISM-13M model reduces MAE by over 50\% compared to other transformer baselines while utilizing only one-fifth of the parameters. Furthermore, a 44M-parameter variant achieves state-of-the-art performance (MAE = 0.010) on our in-distribution validation benchmark and operates significantly faster than simulated annealing, offering a highly efficient alternative to classical optimization methods.

Integral field unit (IFU) spectroscopy provides spatially resolved spectra across galaxies, offering crucial insights into their evolution. However, its high observational cost limits current IFU datasets to sim 10^4 objects. We present a multi-modal, probabilistic foundation model that predicts high-resolution spectra with calibrated uncertainties at arbitrary spatial locations within a galaxy directly from broadband images. Built on a masked autoencoder framework, our architecture injects fiber positional encodings and redshift aware wavelength encodings, enabling spatially conditioned predictions. Trained on 4.7 million images and single fiber spectroscopic observations from the Dark Energy Spectroscopic Instrument (DESI) survey, our model exploits the natural variance of fiber placements and the morphological self-similarity of galaxies to achieve IFU-like capabilities without any IFU training data. Predicted emission line flux maps match independent IFU observations from the Mapping Nearby Galaxies at APO (MaNGA) survey, with performance comparable to a supervised baseline trained directly on IFU data.

We investigate spectral features of bottomonium at high temperature, in particular the thermal mass shift and width of ground state S-wave and P-wave state. We employ and compare a range of methods for determining these features from lattice NRQCD correlators, including direct correlator analyses (multi-exponential fits and moments of spectral functions), linear methods (Backus-Gilbert, Tikhonov and HLT methods), and Bayesian methods for spectral function reconstruction (MEM and BR). We comment on the reliability and limitations of the various methods.

We present an overview of a new integral field spectroscopic survey called MaNGA (Mapping Nearby Galaxies at Apache Point Observatory), one of three core programs in the fourth-generation Sloan Digital Sky Survey (SDSS-IV) that began on 2014 July 1. MaNGA will investigate the internal kinematic structure and composition of gas and stars in an unprecedented sample of 10,000 nearby galaxies. We summarize essential characteristics of the instrument and survey design in the context of MaNGA's key science goals and present prototype observations to demonstrate MaNGA's scientific potential. MaNGA employs dithered observations with 17 fiber-bundle integral field units that vary in diameter from 12" (19 fibers) to 32" (127 fibers). Two dual-channel spectrographs provide simultaneous wavelength coverage over 3600-10300 A at R~2000. With a typical integration time of 3 hr, MaNGA reaches a target r-band signal-to-noise ratio of 4-8 (per A, per 2" fiber) at 23 AB mag per sq. arcsec, which is typical for the outskirts of MaNGA galaxies. Targets are selected with stellar mass greater than 1e9 Msun using SDSS-I redshifts and i-band luminosity to achieve uniform radial coverage in terms of the effective radius, an approximately flat distribution in stellar mass, and a sample spanning a wide range of environments. Analysis of our prototype observations demonstrates MaNGA's ability to probe gas ionization, shed light on recent star formation and quenching, enable dynamical modeling, decompose constituent components, and map the composition of stellar populations. MaNGA's spatially resolved spectra will enable an unprecedented study of the astrophysics of nearby galaxies in the coming 6 yr.

We report on analysis of the two-color VR CCD observations of the newly discovered variable 2MASS J18024395+4003309=VSX J180243.9+400331 obtained using the 1-m telescope of the Mt. Lemmon Observatory (LOAO) in the field of the intermediate polar V1323 Her. The extended version of this conference talk we published in 2015JASS...32..127A. The variability was reported in 2012OAP....25..150A, and the object was monitored. The two-color observations covered all phase interval. The object is classified as an Algol-type variable with tidally distorted components, and shows an asymmetry of the maxima (the O\'Connell effect). For phenomenological modeling, we used the trigonometric polynomial approximation of statistically optimal degree, and a recent method "NAV" (New Algol Variable) using local specific shapes for the eclipse. Methodological aspects are described, especially for the case of few color observations. Estimates of the physical parameters based on analysis of phenomenological parameters, are presented.

In this paper, we present GALEX-SDSS-WISE Legacy Catalog (GSWLC), a catalog of physical properties (stellar masses, dust attenuations and star formation rates (SFRs)) of ~700,000 galaxies with SDSS redshifts below 0.3. GSWLC contains galaxies within the GALEX footprint, regardless of a UV detection, covering 90% of SDSS. The physical properties were obtained from UV/optical SED fitting following Bayesian methodology of Salim et al. (2007), with improvements such as blending corrections for low-resolution UV photometry, flexible dust attenuation laws, and emission line corrections. GSWLC includes mid-IR SFRs derived from IR templates based upon 22 micron WISE observations. These estimates are independent of UV/optical SED fitting, in order to separate possible systematics. The paper argues that the comparison of specific SFRs (SSFRs) is more informative and physically motivated than the comparison of SFRs. SSFRs resulting from the UV/optical SED fitting are compared to the mid-IR SSFRs, and to SSFRs from three published catalogs. For "main sequence" galaxies with no AGN contribution all SSFRs are in very good agreement (within 0.1 dex on average). In particular, the widely-used aperture-corrected SFRs from MPA/JHU catalog show no systematic offsets, in contrast to some integral-field spectroscopy results. For galaxies below the main sequence (log SSFR<-11), mid-IR (S)SFRs based on fixed luminosity-SFR conversion are severely biased (up to 2 dex) because the dust is primarily heated by old stars. Furthermore, mid-IR (S)SFRs are overestimated by up to 0.6 dex for galaxies with AGN, presumably due to non-stellar dust heating. UV/optical (S)SFRs are thus preferred to IR-based (S)SFRs for quenched galaxies and those which host AGN.

Polarization analysis in x-ray spectroscopy provides an orientation dependent sensitivity to local bonding environments. For a cluster of atoms, polarization sensitivity is most often discussed through the lens of point group symmetries. However, this is a discrete, qualitative method of classifying clusters, and it does little to indicate the degree of spectral anisotropy. Here we adopt a random forest model for quantitative prediction of spectral anisotropy. Its input relies on simplified local geometric and chemical information that can be obtained from any crystal structure file. The model is trained on over 10,000 experimentally realized transition metal structures from the Materials Project, with the target being VtC-XES calculated using the real space Green's function code FEFF. We find that the model can strongly predict the degree of spectral anisotropy, with the primary factors being derived from the spatial moments of ligands in a cluster.

The expansion of viewing angle is a crucial factor in holographic displays implemented with a spatial light modulator having a finite space-bandwidth. The enhanced-NA Fresnel hologram reconstructs a holographic image at an angle larger than the diffraction angle by a hologram pixel, where it has a difficulty in achieving this without an interference of high-order noises. This study presents the theoretical foundation for optimizing the enhanced-NA Fresnel hologram to recover the low space-bandwidth. The higher spectrum components of the digital hologram beyond the bandwidth exists in the form of their replications. The expansion of angular spectrum by its repetition during optimization procedure increases the image resolution, resulting in a viewing angle that is dependent on the hologram numerical aperture. We numerically and experimentally verify our strategy to expand a viewing angle of holographic image.

Rotary positional embeddings (RoPE) are widely used in large language models to encode token positions through multiplicative rotations, yet their behavior at long context lengths remains poorly characterized. In this work, we reinterpret RoPE as phase modulation applied to a bank of complex oscillators, enabling analysis through classical signal processing theory. Under this formulation, we derive principled lower bounds on the RoPE base parameter that are necessary to preserve positional coherence over a target context length. These include a fundamental aliasing bound, analogous to a Nyquist limit, and a DC-component stability bound that constrains phase drift in low-frequency positional modes. We further extend this analysis to deep transformers, showing that repeated rotary modulation across layers compounds angular misalignment, tightening the base requirement as depth increases. Complementing these results, we derive a precision-dependent upper bound on the RoPE base arising from finite floating-point resolution. Beyond this limit, incremental phase updates become numerically indistinguishable, leading to positional erasure even in the absence of aliasing. Together, the lower and upper bounds define a precision- and depth-dependent feasibility region a Goldilocks zone for long-context transformers. We validate the framework through a comprehensive case study of state-of-the-art models, including LLaMA, Mistral, and DeepSeek variants, showing that observed successes, failures, and community retrofits align closely with the predicted bounds. Notably, models that violate the stability bound exhibit attention collapse and long-range degradation, while attempts to scale beyond one million tokens encounter a hard precision wall independent of architecture or training.

To meet the challenges of high-resolution molecular spectroscopy, increasingly sophisticated spectroscopic techniques were developed. For a long time FTIR and laser-based spectroscopies were used for these studies. The recent development of dual-comb spectroscopy at high-resolution makes this technique a powerful tool for gas phase studies. We report on the use and characterization of the IRis-F1, a tabletop mid-infrared dual-comb spectrometer, in the newly developed step-sweep mode. The resolution of the wavenumber axis is increased by step-wise tuning (interleaving) and accurate measurement of the laser center wavelength and repetition frequency. Doppler limited measurements of N2O and CH4 reveal a wavenumber accuracy of 1E-4 cm-1 on the covered range of > 50 cm-1. Measured half-widths of absorption lines show no systematic broadening, indicating a negligible instrument response function. Finally, measurements of nitrogen pressure broadening coefficients in the v4 band of methane show that quantum cascade laser dual-comb spectroscopy in step-sweep mode is well adapted for measurements of precision spectroscopic data, in particular line shape parameters.

The radial gradient of gas-phase metallicity is a powerful probe of the chemical and structural evolution of star-forming galaxies, closely tied to disk formation and gas kinematics in the early universe. We present spatially resolved chemical and dynamical properties for a sample of 25 galaxies at 0.5 lesssim z lesssim 1.7 from the \msasd survey. These innovative observations provide 3D spectroscopy of galaxies at a spatial resolution approaching JWST's diffraction limit and a high spectral resolution of Rsimeq2700. The metallicity gradients measured in our galaxy sample range from -0.03 to 0.02 dex~kpc^{-1}. Most galaxies exhibit negative or flat radial gradients, indicating lower metallicity in the outskirts or uniform metallicity throughout the entire galaxy. We confirm a tight relationship between stellar mass and metallicity gradient at zsim1 with small intrinsic scatter of 0.02 dex~kpc^{-1}. Our results indicate that metallicity gradients become increasingly negative as stellar mass increases, likely because the more massive galaxies tend to be more ``disky". This relationship is consistent with the predictions from cosmological hydrodynamic zoom-in simulations with strong stellar feedback. This work presents the effort to harness the multiplexing capability of JWST NIRSpec/MSA in slit-stepping mode to map the chemical and kinematic profiles of high-redshift galaxies in large samples and at high spatial and spectral resolution.

We report on the trapping of single rubidium atoms in large arrays of optical tweezers comprising up to 2088 sites in a cryogenic environment at 6 K. Our approach relies on the use of microscope objectives that are in-vacuum but at room temperature, in combination with windowless thermal shields into which the objectives are protruding to ensure a cryogenic environment for the trapped atoms. To achieve enough optical power for efficient trapping, we combine two lasers at slightly different wavelengths. We discuss the performance and limitations of our design. Finally, we demonstrate atom-by-atom rearrangement of an 828-atom target array using moving optical tweezers controlled by a field-programmable gate array.

We require decomposition methods for the ABCD-matrix formulation in rotationally symmetric paraxial geometric optics when designing a multi-component optical system from a given single paraxial specification (represented by an ABCD matrix) to optimize non-paraxial specifications (e.g., optical aberrations). In this study, we propose two kinds of three-matrix decomposition of ABCD matrices by focusing on the fact that the ABCD matrices have three real-number degrees of freedom. In addition, we formulate a transformation between the two kinds of decomposition for a single matrix, which can increase or decrease the number of refraction surfaces in the optical configuration while keeping the paraxial specifications fixed. This nature is useful for the optical design of multi-component systems with optimized non-paraxial characteristics.

Diffusion models typically suffer from error accumulation during iterative sampling, commonly referred to as exposure bias. We reveal systematic frequency-dependent discrepancies between training and inference, which can be interpreted as frequency-dependent SNR error. Crucially, the direction of this mismatch varies across models and timesteps, indicating that fixed correction rules do not generalize. We propose Spectral Alignment (SPA), a lightweight, guidance-based method that calibrates the power spectrum of intermediate predictions to a pre-computed prior. Our approach consists of two stages: (1) offline fitting of a parametric spectrum model from training data, and (2) inference-time guidance via efficient FFT-based gradient computation. SPA introduces minimal computational overhead (3-4\%) and is complementary to Classifier-Free Guidance (CFG). We demonstrate consistent improvements across diverse architectures, from pixel-space models (DDPM, ADM) to latent diffusion models (SD2.0, SDXL) and flow-matching models (SD3.5, FLUX). Our implementation is available at https://github.com/SonyResearch/SPA.

Light emission from galaxies exhibit diverse brightness profiles, influenced by factors such as galaxy type, structural features and interactions with other galaxies. Elliptical galaxies feature more uniform light distributions, while spiral and irregular galaxies have complex, varied light profiles due to their structural heterogeneity and star-forming activity. In addition, galaxies with an active galactic nucleus (AGN) feature intense, concentrated emission from gas accretion around supermassive black holes, superimposed on regular galactic light, while quasi-stellar objects (QSO) are the extreme case of the AGN emission dominating the galaxy. The challenge of identifying AGN and QSO has been discussed many times in the literature, often requiring multi-wavelength observations. This paper introduces a novel approach to identify AGN and QSO from a single image. Diffusion models have been recently developed in the machine-learning literature to generate realistic-looking images of everyday objects. Utilising the spatial resolving power of the Euclid VIS images, we created a diffusion model trained on one million sources, without using any source pre-selection or labels. The model learns to reconstruct light distributions of normal galaxies, since the population is dominated by them. We condition the prediction of the central light distribution by masking the central few pixels of each source and reconstruct the light according to the diffusion model. We further use this prediction to identify sources that deviate from this profile by examining the reconstruction error of the few central pixels regenerated in each source's core. Our approach, solely using VIS imaging, features high completeness compared to traditional methods of AGN and QSO selection, including optical, near-infrared, mid-infrared, and X-rays.

Attempts to probe the atmospheres of rocky planets around M dwarfs present both promise and peril. While their favorable planet-to-star radius ratios enable searches for even thin secondary atmospheres, their high activity levels and high-energy outputs threaten atmosphere survival. Here, we present the 0.6--2.85\,mum transmission spectrum of the 1.1\,rm R_oplus, sim340\,K rocky planet TRAPPIST-1\,c obtained over two JWST NIRISS/SOSS transit observations. Each of the two spectra displays 100--500\,ppm signatures of stellar contamination. Despite being separated by 367\,days, the retrieved spot and faculae properties are consistent between the two visits, resulting in nearly identical transmission spectra. Jointly retrieving for stellar contamination and a planetary atmosphere reveals that our spectrum can rule out hydrogen-dominated, lesssim300times solar metallicity atmospheres with effective surface pressures down to 10\,mbar at the 3-sigma level. For high-mean molecular weight atmospheres, where O_2 or N_2 is the background gas, our spectrum disfavors partial pressures of more than sim10\,mbar for H_2O, CO, NH_3 and CH_4 at the 2-sigma level. Similarly, under the assumption of a 100\% H_2O, NH_3, CO, or CH_4 atmosphere, our spectrum disfavors thick, >1\,bar atmospheres at the 2-sigma level. These non-detections of spectral features are in line with predictions that even heavier, CO_2-rich, atmospheres would be efficiently lost on TRAPPIST-1\,c given the cumulative high-energy irradiation experienced by the planet. Our results further stress the importance of robustly accounting for stellar contamination when analyzing JWST observations of exo-Earths around M dwarfs, as well as the need for high-fidelity stellar models to search for the potential signals of thin secondary atmospheres.

This paper discusses the use of the Riemann-Silberstein vector to solve the source-free Maxwell's equations and obtains novel analytical solutions. The solving process naturally leads to the spinor form of the source-free Maxwell's equations. Several powerful theorems are established to solve this spinor form equation. The Waveguide Solution Theorem provides an elegant way to solve waveguide problems, while The Schrodinger Solution Theorem connects the Maxwell's equations with the two-dimensional Schrodinger equation. By utilizing The Schrodinger Solution Theorem, a precise formula for spatiotemporal diffraction of the Maxwell's equations is derived, which allows for the reconstruction of electromagnetic waves throughout space and time based on the field distribution on the diffraction screen. And finally, by studying some relevant contour integrals, two additional simple but beautiful mathematical theorems that are necessarily satisfied by electromagnetic field in any source-free region are derived.

This paper presents optical night sky brightness measurements from the stratosphere using CCD images taken with the Super-pressure Balloon-borne Imaging Telescope (SuperBIT). The data used for estimating the backgrounds were obtained during three commissioning flights in 2016, 2018, and 2019 at altitudes ranging from 28 km to 34 km above sea level. For a valid comparison of the brightness measurements from the stratosphere with measurements from mountain-top ground-based observatories (taken at zenith on the darkest moonless night at high Galactic and high ecliptic latitudes), the stratospheric brightness levels were zodiacal light and diffuse Galactic light subtracted, and the airglow brightness was projected to zenith. The stratospheric brightness was measured around 5.5 hours, 3 hours, and 2 hours before the local sunrise time in 2016, 2018, and 2019 respectively. The B, V, R, and I brightness levels in 2016 were 2.7, 1.0, 1.1, and 0.6 mag arcsec^{-2} darker than the darkest ground-based measurements. The B, V, and R brightness levels in 2018 were 1.3, 1.0, and 1.3 mag arcsec^{-2} darker than the darkest ground-based measurements. The U and I brightness levels in 2019 were 0.1 mag arcsec^{-2} brighter than the darkest ground-based measurements, whereas the B and V brightness levels were 0.8 and 0.6 mag arcsec^{-2} darker than the darkest ground-based measurements. The lower sky brightness levels, stable photometry, and lower atmospheric absorption make stratospheric observations from a balloon-borne platform a unique tool for astronomy. We plan to continue this work in a future mid-latitude long duration balloon flight with SuperBIT.

We present an improved version of the 3D Monte Carlo radiative transfer code POSSIS to model kilonovae from neutron star mergers, wherein nuclear heating rates, thermalization efficiencies and wavelength-dependent opacities depend on local properties of the ejecta and time. Using an axially-symmetric two-component ejecta model, we explore how simplistic assumptions on heating rates, thermalization efficiencies and opacities often found in the literature affect kilonova spectra and light curves. Specifically, we compute five models: one (FIDUCIAL) with an appropriate treatment of these three quantities, one (SIMPLE-HEAT) with uniform heating rates throughout the ejecta, one (SIMPLE-THERM) with a constant and uniform thermalization efficiency, one (SIMPLE-OPAC) with grey opacities and one (SIMPLE-ALL) with all these three simplistic assumptions combined. We find that deviations from the FIDUCIAL model are of several (sim1-10) magnitudes and are generally larger for the SIMPLE-OPAC and SIMPLE-ALL compared to the SIMPLE-THERM and SIMPLE-HEAT models. The discrepancies generally increase from a face-on to an edge-on view of the system, from early to late epochs and from infrared to ultraviolet/optical wavelengths. Our work indicates that kilonova studies using either of these simplistic assumptions ought to be treated with caution and that appropriate systematic uncertainties ought to be added to kilonova light curves when performing inference on ejecta parameters.

Among a huge variety of known two-dimensional materials, some of them have anisotropic crystal structures; examples include so different systems as a few-layer black phoshphorus (phosphorene), beryllium nitride BeN_4, van der Waals magnet CrSBr, rhenium dichalgogenides ReX_2. As a consequence, their optical and electronic properties turn out to be highly anisotropic as well. In some cases, the anisotropy results not just in a smooth renormalization of observable properties in comparison with the isotropic case but in the appearance of dramatically new physics. The examples are hyperbolic plasmons and excitons, strongly anisotropic ordering of adatoms at the surface of two-dimensional or van der Waals materials, essential change of transport and superconducting properties. Here, we present a systematic review of electronic structure, transport and optical properties of several representative groups of anisotropic two-dimensional materials including semiconductors, anisotropic Dirac and semi-Dirac materials, as well as superconductors.

In this work, we performed an energy-dependent study of low-frequency oscillations observed in GX 13+1 using AstroSat (Large Area X-ray Proportional Counter and Soft X-ray Telescope). The hardness-intensity diagram (HID) of the observation resembles a `nu'-shaped track, while the color-color diagram exhibits a `<'-shaped track, similar to the horizontal and normal branches of the Z source. We conducted flux-resolved temporal studies focusing on low-frequency variability and divided the HID into five regions: A, B, C, D, and E. Low-frequency quasi-periodic oscillations (QPOs) were detected in Regions A, B, and C. The QPO in Region A has a frequency of 5.06^{+0.54}_{-0.48} Hz with a quality factor (Q-factor) of 2.80. In Region B, the QPO was detected at 4.52^{+0.14}_{-0.13} Hz with a Q-factor of 5.79, while in Region C, it was observed at 4.70^{+0.62}_{-0.42} Hz with a Q-factor of 4.35. The QPO frequencies, Q-factors, and low root-mean-square (rms) values (1.32\%, 1.34\%, and 0.7\%) suggest that these oscillations are Normal Branch Oscillations, similar to those reported in GX 340+0. We modeled the rms and lag of the QPOs using a propagative model, considering variations in blackbody temperature, coronal heating rate, and optical depth. Our findings indicate that the observed QPOs are likely driven by interactions between the corona and variations in the blackbody temperature.

The development of radiance fields (RF), such as 3D Gaussian Splatting (3DGS) and Neural Radiance Fields (NeRF), has revolutionized interactive photorealistic view synthesis and presents enormous opportunities for XR research and applications. However, despite the exponential growth of RF research, RF-related contributions to the XR community remain sparse. To better understand this research gap, we performed a systematic survey of current RF literature to analyze (i) how RF is envisioned for XR applications, (ii) how they have already been implemented, and (iii) the remaining research gaps. We collected 365 RF contributions related to XR from computer vision, computer graphics, robotics, multimedia, human-computer interaction, and XR communities, seeking to answer the above research questions. Among the 365 papers, we performed an analysis of 66 papers that already addressed a detailed aspect of RF research for XR. With this survey, we extended and positioned XR-specific RF research topics in the broader RF research field and provide a helpful resource for the XR community to navigate within the rapid development of RF research.

Outdoor-to-indoor (OtI) signal propagation further challenges the already tight link budgets at millimeter-wave (mmWave). To gain insight into OtI mmWave scenarios at 28 GHz, we conducted an extensive measurement campaign consisting of over 2,200 link measurements. In total, 43 OtI scenarios were measured in West Harlem, New York City, covering seven highly diverse buildings. The measured OtI path gain can vary by up to 40 dB for a given link distance, and the empirical path gain model for all data shows an average of 30 dB excess loss over free space at distances beyond 50 m, with an RMS fitting error of 11.7 dB. The type of glass is found to be the single dominant feature for OtI loss, with 20 dB observed difference between empirical path gain models for scenarios with low-loss and high-loss glass. The presence of scaffolding, tree foliage, or elevated subway tracks, as well as difference in floor height are each found to have an impact between 5-10 dB. We show that for urban buildings with high-loss glass, OtI coverage can support 500 Mbps for 90% of indoor user equipment (UEs) with a base station (BS) antenna placed up to 49 m away. For buildings with low-loss glass, such as our case study covering multiple classrooms of a public school, data rates over 2.5/1.2 Gbps are possible from a BS 68/175 m away from the school building, when a line-of-sight path is available. We expect these results to be useful for the deployment of mmWave networks in dense urban environments as well as the development of relevant scheduling and beam management algorithms.

The star formation rate is a crucial astrophysical tracer for understanding the formation and evolution of galaxies, determining the interaction between interstellar medium properties and star formation, thereby inferring the evolutionary laws of cosmic star formation history and cosmic energy density. The mainstream approach to studying the stellar property in galaxies relies on pure stellar population synthesis models. However, these methods fail to account for the contamination of SFR caused by nebular gas radiation. Recent studies have indicated that neglecting nebular radiation contamination appears non-negligible in galaxies with intense star-forming activities and at relatively high redshifts, potentially leading to overestimating stellar masses. However, there is currently limited targeted research, particularly regarding galaxies at redshifts (z < 0.4). In this work, 6,511 star-formation galaxies are selected from the SDSS-DR18, and FADO fits their spectra. This tool can exclude nebular radiation contributions in the spectral fitting. A tentative work is carried out to explore the SFR of these galaxies. The results indicate that the median \( H_{\alpha} \) flux obtained from FADO fitting differs from that obtained using the pure stellar population synthesis model {\it qsofitmore} by approximately 0.034 dex. Preliminary evidence suggests that the average nebula ratio increases with redshift. Additionally, we investigated the impact of stellar mass on the nebula ratio at low to moderate redshifts. By comparing two spectral fitting software packages, we found that although the contribution of nebular emission is minimal, it generally shows an increasing trend with redshift. We anticipate that by combining optical and near-infrared spectral data, the influence of nebulae may become more prominent in star-forming galaxies at higher redshifts (e.g., up to z sim 2).

The Advanced LIGO gravitational wave detectors are second generation instruments designed and built for the two LIGO observatories in Hanford, WA and Livingston, LA. The two instruments are identical in design, and are specialized versions of a Michelson interferometer with 4 km long arms. As in initial LIGO, Fabry-Perot cavities are used in the arms to increase the interaction time with a gravitational wave, and power recycling is used to increase the effective laser power. Signal recycling has been added in Advanced LIGO to improve the frequency response. In the most sensitive frequency region around 100 Hz, the design strain sensitivity is a factor of 10 better than initial LIGO. In addition, the low frequency end of the sensitivity band is moved from 40 Hz down to 10 Hz. All interferometer components have been replaced with improved technologies to achieve this sensitivity gain. Much better seismic isolation and test mass suspensions are responsible for the gains at lower frequencies. Higher laser power, larger test masses and improved mirror coatings lead to the improved sensitivity at mid- and high- frequencies. Data collecting runs with these new instruments are planned to begin in mid-2015.

Optical resonances in nanostructures enable strong enhancement of nonlinear processes at the nanoscale, such as second-harmonic generation (SHG), with high-Q modes providing intensified light--matter interactions and sharp spectral selectivity for applications in filtering, sensing, and nonlinear spectroscopy. Thanks to the recent advances in thin-film lithium niobate (TFLN) technology, these key features can be now translated to lithium niobate for realizing novel nanoscale nonlinear optical platforms. Here, we demonstrate a large-area metasurface, realized by scalable nanoimprint lithography, comprising a slanted titanium dioxide (TiO_2) nanograting on etchless TFLN for efficient narrowband SHG. This is enabled by the optimal coupling of quasi-bound state in the continuum (q-BIC) modes with a narrowband pulsed laser pump. The demonstrated normalized SHG efficiency is 0.15%,cm^2/GW, which is among the largest reported for LN metasurfaces. The low pump peak intensity (3.64~kW/cm^2) employed, which enables SHG even by continuous-wave pumping, allows envisioning integrated and portable photonic applications. SHG wavelength tuning from 870 to 920~nm with stable output power as well as polarization control is also achieved by off-normal pump illumination. This versatile platform opens new opportunities for sensing, THz generation and detection, and ultrafast electro-optic modulation of nonlinear optical signals.

Light-matter interactions that lead to nonthermal changes in size of the sample constitute a photostrictive effect in many compounds. The photostriction phenomenon was observed in four main groups of materials, ferroelectrics, polar, and non-polar semiconductors, as well as in organic-based materials that are reviewed here. The key mechanisms of photostriction and its dependence on several parameters and perturbations are assessed. The major literature of the photostriction is surveyed, and the review ends with a summary of the proposed technical applications.

We present the photometric properties of galaxies in the First Light and Reionisation Epoch Simulations (FLARES). The simulations trace the evolution of galaxies in a range of overdensities through the Epoch of Reionistion (EoR). With a novel weighting scheme we combine these overdensities, extending significantly the dynamic range of observed composite distribution functions compared to periodic simulation boxes. FLARES predicts a significantly larger number of intrinsically bright galaxies, which can be explained through a simple model linking dust-attenuation to the metal content of the interstellar medium, using a line-of-sight (LOS) extinction model. With this model we present the photometric properties of the FLARES galaxies for z in [5,10]. We show that the ultraviolet (UV) luminosity function (LF) matches the observations at all redshifts. The function is fit by Schechter and double power-law forms, with the latter being favoured at these redshifts by the FLARES composite UV LF. We also present predictions for the UV continuum slope as well as the attenuation in the UV. The impact of environment on the UV LF is also explored, with the brightest galaxies forming in the densest environments. We then present the line luminosity and equivalent widths of some prominent nebular emission lines arising from the galaxies, finding rough agreement with available observations. We also look at the relative contribution of obscured and unobscured star formation, finding comparable contributions at these redshifts.

While the temporal variations of the spectro-polarimetric nature of pulsars remains unexplored, this investigation offers significant potential for uncovering key insights into pulsar emission mechanisms, magnetic field geometry, and propagation effects within the magnetosphere. We developed a package for investigating time-varying spectral behavior for full Stokes parameters and demonstrate it on a millisecond pulsar (MSP) J2144-5237 in a binary system (orbital period ~10 days) using the Parkes UWL receiver. In this study we report rotation measure (RM) variation with orbital phase. We find that the temporal variations in the spectra of Stokes I, Q, and V are generally correlated throughout the orbit, while Stokes U exhibits intervals of both correlation and anticorrelation with Stokes I, depending on the orbital phase. We also provide a Poincare sphere representation of the polarization properties of J2144-5237, demonstrating a systematic temporal change of Poincare sphere location for the main component with orbital phase. To our knowledge, this is the first investigation of time-varying properties of the spectro-polarimetric nature of any pulsars or MSPs. Extending this study to probe the spectro-temporal nature of full Stokes data on a larger sample of MSPs or pulsars has the potential to provide vital information on emission mechanisms inside the magnetosphere, interstellar propagation effects, and binary interactions.

We describe a new detector, called NuLat, to study electron anti-neutrinos a few meters from a nuclear reactor, and search for anomalous neutrino oscillations. Such oscillations could be caused by sterile neutrinos, and might explain the "Reactor Antineutrino Anomaly". NuLat, is made possible by a natural synergy between the miniTimeCube and mini-LENS programs described in this paper. It features a "Raghavan Optical Lattice" (ROL) consisting of 3375 boron or ^6Li loaded plastic scintillator cubical cells 6.3\,cm (2.500") on a side. Cell boundaries have a 0.127\,mm (0.005") air gap, resulting in total internal reflection guiding most of the light down the 3 cardinal directions. The ROL detector technology for NuLat gives excellent spatial and energy resolution and allows for in-depth event topology studies. These features allow us to discern inverse beta decay (IBD) signals and the putative oscillation pattern, even in the presence of other backgrounds. We discuss here test venues, efficiency, sensitivity and project status.

Despite the recent advances in the field of computational Schr\"odinger Bridges (SB), most existing SB solvers are still heavy-weighted and require complex optimization of several neural networks. It turns out that there is no principal solver which plays the role of simple-yet-effective baseline for SB just like, e.g., k-means method in clustering, logistic regression in classification or Sinkhorn algorithm in discrete optimal transport. We address this issue and propose a novel fast and simple SB solver. Our development is a smart combination of two ideas which recently appeared in the field: (a) parameterization of the Schr\"odinger potentials with sum-exp quadratic functions and (b) viewing the log-Schr\"odinger potentials as the energy functions. We show that combined together these ideas yield a lightweight, simulation-free and theoretically justified SB solver with a simple straightforward optimization objective. As a result, it allows solving SB in moderate dimensions in a matter of minutes on CPU without a painful hyperparameter selection. Our light solver resembles the Gaussian mixture model which is widely used for density estimation. Inspired by this similarity, we also prove an important theoretical result showing that our light solver is a universal approximator of SBs. Furthemore, we conduct the analysis of the generalization error of our light solver. The code for our solver can be found at https://github.com/ngushchin/LightSB

With its exquisite sensitivity, wavelength coverage, and spatial and spectral resolution, the James Webb Space Telescope is poised to revolutionise our view of the distant, high-redshift (z>5) Universe. While Webb's spectroscopic observations will be transformative for the field, photometric observations play a key role in identifying distant objects and providing more comprehensive samples than accessible to spectroscopy alone. In addition to identifying objects, photometric observations can also be used to infer physical properties and thus be used to constrain galaxy formation models. However, inferred physical properties from broadband photometric observations, particularly in the absence of spectroscopic redshifts, often have large uncertainties. With the development of new tools for forward modelling simulations it is now routinely possible to predict observational quantities, enabling a direct comparison with observations. With this in mind, in this work, we make predictions for the colour evolution of galaxies at z=5-15 using the FLARES: First Light And Reionisation Epoch Simulations cosmological hydrodynamical simulation suite. We predict a complex evolution, driven predominantly by strong nebular line emission passing through individual bands. These predictions are in good agreement with existing constraints from Hubble and Spitzer as well as some of the first results from Webb. We also contrast our predictions with other models in the literature: while the general trends are similar we find key differences, particularly in the strength of features associated with strong nebular line emission. This suggests photometric observations alone should provide useful discriminating power between different models.

JWST has now made it possible to probe the rest-frame optical line emission of high-redshift galaxies extending to z~9, and potentially beyond. To aid in the interpretation of these emerging constraints, in this work we explore predictions for [OIII] emission in high-redshift galaxies using the First Light and Reionisation Epoch Simulations (FLARES). We produce predictions for the [OIII] luminosity function, its correlation with the UV luminosity, and the distribution of equivalent widths (EWs). We also explore how the [OIII] EW correlates with physical properties including specific star formation rate, metallicity, and dust attenuation. Our predictions are largely consistent with recent observational constraints on the luminosity function, average equivalent widths, and line ratios. However, they fail to reproduce the observed tail of high-EW sources and the number density of extreme line emitters. Possibilities to explain these discrepancies include an additional source of ionising photons and/or greater stochasticity in star formation in the model or photometric scatter and/or bias in the observations. With JWST now rapidly building larger samples and a wider range of emission lines the answer to this remaining discrepancy should be available imminently.

Within the paradigm of metamaterials and metasurfaces, electromagnetic properties of composite materials can be engineered by shaping or modulating their constituents, so-called meta-atoms. Synthesis and analysis of complex-shape meta-atoms with general polarization properties is a challenging task. In this paper, we demonstrate that the most general response can be conceptually decomposed into a set of basic, fundamental polarization phenomena, which enables immediate all-direction characterization of electromagnetic properties of arbitrary linear metamaterials and metasurfaces. The proposed platform of modular characterization (called "materiatronics") is tested on several examples of bianisotropic and nonreciprocal meta-atoms. As a demonstration of the potential of the modular analysis, we use it to design a single-layer metasurface of vanishing thickness with unitary circular dichroism. The analysis approach developed in this paper is supported by a ready-to-use computational code and can be further extended to meta-atoms engineered for other types of wave interactions, such as acoustics and mechanics.

We propose a simple modification of space-based gravitational wave (GW) detector optical benches which would enable the measurement of vacuum birefringence of light induced by axion dark matterthrough its coupling to electromagnetism. Specifically, we propose to change a half-wave plate by a circular polarizer. While marginally affecting the sensitivity to GW by a factor 2, we show that such an adjustment would make future detectors such as LISA, TianQin, Taiji and Big-Bang Observer the most sensitive experiments at low axion masses

We present a model for chi^{(2)} waveguides accounting for three modes, two of which make an avoided crossing at the second harmonic wavelength. We introduce two linearly coupled pure modes and adjust the coupling to replicate the waveguide dispersion near the avoided crossing. Analysis of the nonlinear system reveals continuous wave (CW) solutions across much of the parameter-space and prevalence of its modulational instability. We also predict the existence of the avoided-crossing solitons, and study peculiarities of their dynamics and spectral properties, which include formation of a pedestal in the pulse tails and associated pronounced spectral peaks. Mapping these solitons onto the linear dispersion diagrams, we make connections between their existence and CW existence and stability. We also simulate the two-color soliton generation from a single frequency pump pulse to back up its formation and stability properties.

We present synthetic light curves and spectra from three-dimensional (3D) Monte Carlo radiative transfer simulations based on a 3D core-collapse supernova explosion model of an ultra-stripped 3.5,M_{odot} progenitor. Our calculations predict a fast and faint transient with Delta m_{15} sim 1- 2,mag and peak bolometric luminosity between -15.3,mag and -16.4,mag. Due to a large-scale unipolar asymmetry in the distribution of ^{56}Ni, there is a pronounced viewing-angle dependence with about 1,mag difference between the directions of highest and lowest luminosity. The predicted spectra for this rare class of explosions do not yet match any observed counterpart. They are dominated by prominent Mg~II lines, but features from O, C, Si, and Ca are also found. In particular, the O~I line at 7{774} appears as a blended feature together with Mg~II emission. Our model is not only faster and fainter than the observed Ib/c supernova population, but also shows a correlation between higher peak luminosity and larger Delta m_{15} that is not present in observational samples. A possible explanation is that the unusually small ejecta mass of our model accentuates the viewing-angle dependence of the photometry. We suggest that the viewing-angle dependence of the photometry may be used to constrain asymmetries in explosion models of more typical stripped-envelope supernova progenitors in future.

The twist-grain-boundary (TGB) phases, characterized by a periodic, helical arrangement of blocks made of polar smectic phases, SmAF and SmCF, have been discovered. They have been observed for rod-like molecules with a strong longitudinal dipole moment, featuring an (S)-2-methylbutyl end group having only weak twisting power, and emerge below the antiferroelectric SmAAF phase, where the lamellar structure is already well established. It is suggested that the structure is governed by electrostatic interactions amplified by weak chiral forces, in striking contrast to the mechanism of TGB phase formation found in non-polar materials. The TGB phases exhibit light selective reflection in the visible range, while the value of electric polarization confirms an almost perfectly ordered dipole alignment.

Rotary Position Embedding (RoPE) is an efficient position encoding approach and is widely utilized in numerous large language models (LLMs). Recently, a lot of methods have been put forward to further expand the context window based on RoPE. The core concept of those methods is to predefine or search for a set of factors to rescale the base frequencies of RoPE. Nevertheless, it is quite a challenge for existing methods to predefine an optimal factor due to the exponential search space. In view of this, we introduce PSC (Phase Shift Calibration), a small module for calibrating the frequencies predefined by existing methods. With the employment of PSC, we demonstrate that many existing methods can be further enhanced, like PI, YaRN, and LongRoPE. We conducted extensive experiments across multiple models and tasks. The results demonstrate that (1) when PSC is enabled, the comparative reductions in perplexity increase as the context window size is varied from 16k, to 32k, and up to 64k. (2) Our approach is broadly applicable and exhibits robustness across a variety of models and tasks. The code can be found at https://github.com/WNQzhu/PSC.

Neural operator models trained on simulation data often lose accuracy when applied to experimental measurements due to the sim-to-real gap. Standard fine-tuning with limited real data can reduce this gap, but it may also damage the core physics-relevant representations learned during pretraining. Although knowledge-preserving adaptation has been widely investigated in vision or language tasks, it remains unclear whether these methods are suitable for neural operators whose architectures and protected knowledge are fundamentally different. Neural operators need to preserve core-scale physical structures rather than semantic or visual features. We propose PhysGuard, a physics-preserving framework for accurate sim-to-real adaptation of neural operators. Specifically, PhysGuard uses the empirical Fisher Information Matrix computed on simulation data to identify physics-critical parameter directions, then restricts fine-tuning updates to directions that do not interfere with them. A layer-wise Gram-matrix formulation makes this efficient for models with millions of parameters, while an adaptive threshold automatically determines the protected subspace size. A spectral probe experiment shows that the dominant Fisher directions are strongly associated with low-frequency output structures. Experiments on benchmark across four neural operator architectures and different physical systems show that PhysGuard performs strongly on most evaluation metrics compared to baselines. The benefits are most evident under severe domain shift, where it reduces low-frequency error by up to 32\% compared to standard fine-tuning while maintaining adaptability. Our code is available at https://github.com/ZhouChaunge/PhysGuard.

Active Galactic Nuclei (AGN) are some of the most luminous and extreme environments in the Universe. The central engines of AGN, believed to be super-massive black-holes, are fed by accretion discs threaded by magnetic fields within a dense magneto-ionic medium. We report our findings from polarimetric Very-long-baseline Interferometry (VLBI) observations of quasar NRAO150 taken in October 2022 using a combined network of the Very Long Baseline Array (VLBA) and Effelsberg 100-m Radio Telescope. These observations are the first co-temporal multi-frequency polarimetric VLBI observations of NRAO150 at frequencies above 15GHz. We use the new VLBI polarization calibration procedure, GPCAL, with polarization observations of frequencies of 12GHz, 15GHz, 24GHz, and 43GHz of NRAO150. From these observations, we measure Faraday rotation. Using our measurement of Faraday rotation, we also derive the intrinsic electric vector position angle (EVPA0) for the source. As a complementary measurement we determine the behavior of polarization as a function of observed frequency. The polarization from NRAO150 only comes from the core region, with a peak polarization intensity occurring at 24GHz. Across the core region of NRAO150 we see clear gradients in Faraday rotation and EVPA0 values that are aligned with the direction of the jet curving around the core region. We find that for the majority of the polarized region the polarization fraction is greater at higher frequencies, with intrinsic polarization fractions in the core 3%. The Faraday rotation gradients and circular patterns in EVPA0 are strong evidence for a helical/toroidal magnetic field, and the presence of low intrinsic polarization fractions indicate that the polarized emission and hence the helical/toroidal magnetic field, occur within the innermost jet.

We investigate the foreground interstellar medium along the line of sight and intracluster medium of omega Centauri (omega Cen) by measuring the equivalent width of Na I D absorptions from MUSE observations. The large line-of-sight velocity difference between omega Cen and the foreground enables us to separate Na I D absorption contributed from atomic gas in the interstellar and intracluster medium. We find that small-scale substructures in the foreground Na I D distribution correlate with differential reddening derived from photometric methods. Using an empirical Na I D equivalent width-reddening relation, we determine an average reddening of E(B-V)=0.153pm0.003 mag within the half-light radius of omega Cen. However, the Na I D-inferred differential reddening is significantly larger than photometric estimates. This is likely due to scatter in the Na I D-reddening relation. We find no evidence for intracluster atomic gas from spectra of horizontal branch stars, as there is no significant Na I D absorption at omega Cen's systemic velocity. Given this non-detection, we place the strongest upper limit to date on the intracluster atomic gas column density in omega Cen of lesssim2.17 times 10^{18}~cm^{-2}. We also estimate the ionized gas density from pulsar dispersion measure variations, which exceed the atomic gas limit by sim50 times. Nevertheless, the strong correlation between dispersion measure and foreground Na I D suggests that much or all of this ionized gas resides in the foreground. Given ongoing mass loss from bright giant stars, our findings imply that the intracluster gas accumulation timescale is short, and gas removal in the cluster is likely not tied to stripping as omega Cen passes through the Galactic disk.

Our understanding of the physical properties of star-forming galaxies during the Epoch of Reionization (EoR, at z > 6) suffers from degeneracies among the apparent properties of the stars, the nebular gas, and the dust. These degeneracies are most prominent with photometry, which has insufficient (1) spectral resolution and (2) rest-frame spectral coverage. We explore ways to break these degeneracies with a sample of N = 22 high-redshift star-forming galaxies at 7 < z_{phot} leq 9, using some of the deepest existing imaging from JWST/NIRCam and JWST/MIRI with JADES. Key to this study is the imaging from JWST/MIRI at 7.7 mum, which provides coverage of the rest-frame I-band at the observed redshifts. We infer stellar population properties and rest-frame colors using a variety of filter sets and star formation history assumptions to explore the impact of these choices. Evaluating these quantities both with and without the 7.7 mum data point shows that dense spectral coverage with JWST/NIRCam (eight or more filters, including at least one medium-band) can compensate for lacking the rest-frame I-band coverage for the vast majority (approx 80%) of our sample. Furthermore, these galaxy properties are most consistently determined by assuming the delayed-tau star formation history, which provides the smallest offsets and scatters around these offsets when including JWST/MIRI. Within extragalactic surveys like JADES and CEERS, our findings suggest that robust characterization of the stellar population properties and rest-frame colors for high-redshift star-forming galaxies is possible with JWST/NIRCam alone at z approx 8.

Large deployable mesh reflectors are essential for space applications, providing precise reflecting surfaces for high-gain antennas used in satellite communications, Earth observation, and deep-space missions. During on-orbit missions, active shape adjustment and attitude control are crucial for maintaining surface accuracy and proper orientation for these reflectors, ensuring optimal performance. Preventing resonance through thorough dynamic modeling and vibration analysis is vital to avoid structural damage and ensure stability and reliability. Existing dynamic modeling approaches, such as wave and finite element methods, often fail to accurately predict dynamic responses due to the limited capability of handling three-dimensional reflectors or the oversimplification of cable members of a reflector. This paper proposes the Cartesian spatial discretization method for dynamic modeling and vibration analysis of cable-network structures in large deployable mesh reflectors. This method defines cable member positions as a summation of internal and boundary-induced terms within a global Cartesian coordinate system. Numerical simulation on a two-dimensional cable-network structure and a center-feed mesh reflector demonstrates the superiority of the proposed method over traditional approaches, highlighting its accuracy and versatility, and establishing it as a robust tool for analyzing three-dimensional complex reflector configurations.

Can we capture shape and reflectance in stealth? Such capability would be valuable for many application domains in vision, xR, robotics, and HCI. We introduce Structured Polarization, the first depth and reflectance sensing method using patterns of polarized light (SPIDeRS). The key idea is to modulate the angle of linear polarization (AoLP) of projected light at each pixel. The use of polarization makes it invisible and lets us recover not only depth but also directly surface normals and even reflectance. We implement SPIDeRS with a liquid crystal spatial light modulator (SLM) and a polarimetric camera. We derive a novel method for robustly extracting the projected structured polarization pattern from the polarimetric object appearance. We evaluate the effectiveness of SPIDeRS by applying it to a number of real-world objects. The results show that our method successfully reconstructs object shapes of various materials and is robust to diffuse reflection and ambient light. We also demonstrate relighting using recovered surface normals and reflectance. We believe SPIDeRS opens a new avenue of polarization use in visual sensing.

We present results of the long-term multi-wavelength study of optical, UV and X-ray variability of the nearby changing-look (CL) Seyfert NGC 1566 observed with the Swift Observatory and the MASTER Global Robotic Network from 2007 to 2019. We started spectral observations with South African Astronomical Observatory 1.9-m telescope soon after the brightening was discovered in July 2018 and present here the data for the interval between Aug. 2018 to Sep. 2019. This paper concentrates on the remarkable post-maximum behaviour after July 2018 when all bands decreased with some fluctuations. We observed three significant re-brightenings in the post-maximum period during 17 Nov. 2018 - 10 Jan. 2019, 29 Apr. - 19 Jun. 2019 and 27 Jul.- 6 Aug. 2019. An X-ray flux minimum occurred in Mar. 2019. The UV minimum occurred about 3 months later. It was accompanied by a decrease of the Luv/Lx ratio. New post-maximum spectra covering (31 Nov. 2018 - 23 Sep. 2019) show dramatic changes compared to 2 Aug. 2018, with fading of the broad lines and [Fe X]6374 until Mar. 2019. These lines became somewhat brighter in Aug.-Sep. 2019. Effectively, two CL states were observed for this object: changing to type 1.2 and then returning to the low state as a type 1.8 Sy. We suggest that the changes are due mostly to fluctuations in the energy generation. The estimated Eddington ratios are about 0.055% for minimum in 2014 and 2.8% for maximum in 2018.

We present a web-based software tool, the Virtual Quantum Optics Laboratory (VQOL), that may be used for designing and executing realistic simulations of quantum optics experiments. A graphical user interface allows one to rapidly build and configure a variety of different optical experiments, while the runtime environment provides unique capabilities for visualization and analysis. All standard linear optical components are available as well as sources of thermal, coherent, and entangled Gaussian states. A unique aspect of VQOL is the introduction of non-Gaussian measurements using detectors modeled as deterministic devices that "click" when the amplitude of the light falls above a given threshold. We describe the underlying theoretical models and provide several illustrative examples. We find that VQOL provides a a faithful representation of many experimental quantum optics phenomena and may serve as both a useful instructional tool for students as well as a valuable research tool for practitioners.

We obtain the multiple-parameter quantum Cram\'er-Rao bound for estimating the transverse Cartesian components of the centroid and separation of two incoherent optical point sources using an imaging system with finite spatial bandwidth. Under quite general and realistic assumptions on the point-spread function of the imaging system, and for weak source strengths, we show that the Cram\'er-Rao bounds for the x and y components of the separation are independent of the values of those components, which may be well below the conventional Rayleigh resolution limit. We also propose two linear optics-based measurement methods that approach the quantum bound for the estimation of the Cartesian components of the separation once the centroid has been located. One of the methods is an interferometric scheme that approaches the quantum bound for sub-Rayleigh separations. The other method using fiber coupling can in principle attain the bound regardless of the distance between the two sources.

The optical properties of the superconducting K_{0.8}Fe_{1.7}(Se_{0.73}S_{0.27})_2 single crystals with a critical temperature T_capprox 26 K have been measured in the {\it ab} plane in a wide frequency range using both infrared Fourier-transform spectroscopy and spectroscopic ellipsometry at temperatures of 4--300 K. The normal-state reflectance of K_{0.8}Fe_{1.7}(Se_{0.73}S_{0.27})_2 is analyzed using a Drude-Lorentz model with one Drude component. The temperature dependences of the plasma frequency, optical conductivity, scattering rate, and dc resistivity of the Drude contribution in the normal state are presented. In the superconducting state, we observe a signature of the superconducting gap opening at 2Δ(5~K) = 11.8~meV. An abrupt decrease in the low-frequency dielectric permittivity varepsilon _1(ω) at T < T_c also evidences the formation of the superconducting condensate. The superconducting plasma frequency ω_{pl,s} = (213pm 5)~cm^{-1} and the magnetic penetration depth λ=(7.5pm 0.2)~μm at T=5~K are determined.

Many colour maps provided by vendors have highly uneven perceptual contrast over their range. It is not uncommon for colour maps to have perceptual flat spots that can hide a feature as large as one tenth of the total data range. Colour maps may also have perceptual discontinuities that induce the appearance of false features. Previous work in the design of perceptually uniform colour maps has mostly failed to recognise that CIELAB space is only designed to be perceptually uniform at very low spatial frequencies. The most important factor in designing a colour map is to ensure that the magnitude of the incremental change in perceptual lightness of the colours is uniform. The specific requirements for linear, diverging, rainbow and cyclic colour maps are developed in detail. To support this work two test images for evaluating colour maps are presented. The use of colour maps in combination with relief shading is considered and the conditions under which colour can enhance or disrupt relief shading are identified. Finally, a set of new basis colours for the construction of ternary images are presented. Unlike the RGB primaries these basis colours produce images whereby the salience of structures are consistent irrespective of the assignment of basis colours to data channels.

We conducted a multi-wavelength analysis of the blazar Mrk\,501, utilizing observations from AstroSat (SXT, LAXPC), Swift-UVOT, and Fermi-LAT during the period August 15, 2016 to March 27, 2022. The resulting multi-wavelength light curve revealed relatively low activity of the source across the electromagnetic spectrum. Notably, logparabola and broken power-law models provided a better fit to the joint X-ray spectra from AstroSat-SXT/LAXPC instruments compared to the power-law model. During the low activity state, the source showed the characteristic harder when brighter trend at the X-ray energies. To gain insights into underlying physical processes responsible for the broadband emission, we performed a detailed broadband spectral analysis using the convolved one-zone leptonic model with different forms of particle distributions such as logparabola (LP), broken power-law (BPL), power-law model with maximum energy (ξ_{max}), and energy-dependent acceleration (EDA) models. Our analysis revealed similar reduced-χ^2 values for the four particle distributions. The LP and EDA models exhibited the lowest jet powers. The correlation analyses conducted for the LP and BPL models revealed that there is a positive correlation between jet power and bulk Lorentz factor. Specifically, in the LP model, jet power proved independent of γ_{min}, whereas in the broken power-law model, jet power decreased with an increase in γ_{min}. The jet power in the LP/EDA particle distribution is nearly 10 percent of the Eddington luminosity of a 10^7 M_odot black hole. This result suggests that the jet could potentially be fueled by accretion processes.

We present GRaF, Generalizable Radio-Frequency (RF) Radiance Fields, a framework that models RF signal propagation to synthesize spatial spectra at arbitrary transmitter or receiver locations, where each spectrum measures signal power across all surrounding directions at the receiver. Unlike state-of-the-art methods that adapt vanilla Neural Radiance Fields (NeRF) to the RF domain with scene-specific training, GRaF generalizes across scenes to synthesize spectra. To enable this, we prove an interpolation theory in the RF domain: the spatial spectrum from a transmitter can be approximated using spectra from geographically proximate transmitters. Building on this theory, GRaF comprises two components: (i) a geometry-aware Transformer encoder that captures spatial correlations from neighboring transmitters to learn a scene-independent latent RF radiance field, and (ii) a neural ray tracing algorithm that estimates spectrum reception at the receiver. Experimental results demonstrate that GRaF outperforms existing methods on single-scene benchmarks and achieves state-of-the-art performance on unseen scene layouts.

Most Galactic Globular Clusters (GCs) harbour multiple populations of stars (MPs), composed of at least two generations: the first characterized by a "standard" α-enhanced metal mixture, as observed in field halo stars of the Milky Way, and the second displaying anti-correlated CN--ONa chemical abundance pattern in combination with an enhanced helium fraction. Adequate collections of stellar spectra are needed to characterize the effect of such stellar abundance changes on the integrated light of GCs. We present a grid of synthetic stellar spectra covering the atmospheric parameters relevant to old stellar populations at four subsolar metallicities and two abundance patterns, representative of first- and second-generations of stars in GCs. Integrated spectra of populations were computed using our stellar grid and empirical stellar populations, namely, colour-magnitude diagrams from literature for Galactic GCs. The spectra range from 290 to 1000nm, where we measured the effect on several spectrophotometric indices due to the surface abundance variations attributed to MPs. We find non-negligible effects of the MPs on spectroscopic indices sensitive to C, N, Ca, or Na, and on Balmer indices; we also describe how MPs modify specific regions in the near-UV and near-IR that can be measured with narrow or medium photometric passbands. The effects vary with metallicity. A number of these changes remain detectable even when accounting for the stochastic fluctuations due to the finite nature of the stellar population cluster.

The lack of freely available standardized datasets represents an aggravating factor during the development and testing the performance of novel computational techniques in exposure assessment and dosimetry research. This hinders progress as researchers are required to generate numerical data (field, power and temperature distribution) anew using simulation software for each exposure scenario. Other than being time consuming, this approach is highly susceptible to errors that occur during the configuration of the electromagnetic model. To address this issue, in this paper, the limited available data on the incident power density and resultant maximum temperature rise on the skin surface considering various steady-state exposure scenarios at 10-90 GHz have been statistically modeled. The synthetic data have been sampled from the fitted statistical multivariate distribution with respect to predetermined dosimetric constraints. We thus present a comprehensive and open-source dataset compiled of the high-fidelity numerical data considering various exposures to a realistic source. Furthermore, different surrogate models for predicting maximum temperature rise on the skin surface were fitted based on the synthetic dataset. All surrogate models were tested on the originally available data where satisfactory predictive performance has been demonstrated. A simple technique of combining quadratic polynomial and tensor-product spline surrogates, each operating on its own cluster of data, has achieved the lowest mean absolute error of 0.058 {\deg}C. Therefore, overall experimental results indicate the validity of the proposed synthetic dataset.

The X-ray polarization observations made possible with the Imaging X-ray Polarimetry Explorer (IXPE) offer new ways of probing high-energy emission processes in astrophysical jets from blazars. Here we report on the first X-ray polarization observation of the blazar S4 0954+65 in a high optical and X-ray state. During our multi-wavelength campaign on the source, we detected an optical flare whose peak coincided with the peak of an X-ray flare. This optical-X-ray flare most likely took place in a feature moving along the parsec-scale jet, imaged at 43 GHz by the Very Long Baseline Array. The 43 GHz polarization angle of the moving component underwent a rotation near the time of the flare. In the optical band, prior to the IXPE observation, we measured the polarization angle to be aligned with the jet axis. In contrast, during the optical flare the optical polarization angle was perpendicular to the jet axis; after the flare, it reverted to being parallel to the jet axis. Due to the smooth behavior of the optical polarization angle during the flare, we favor shocks as the main acceleration mechanism. We also infer that the ambient magnetic field lines in the jet were parallel to the jet position angle. The average degree of optical polarization during the IXPE observation was (14.3pm4.1)%. Despite the flare, we only detected an upper limit of 14% (at 3sigma level) on the X-ray polarization degree; although a reasonable assumption on the X-ray polarization angle results in an upper limit of 8.8% (3sigma). We model the spectral energy distribution (SED) and spectral polarization distribution (SPD) of S4 0954+65 with leptonic (synchrotron self-Compton) and hadronic (proton and pair synchrotron) models. The constraints we obtain with our combined multi-wavelength polarization observations and SED modeling tentatively disfavor hadronic models for the X-ray emission in S4 0954+65.

Deep spectrophotometry has proved to be a fundamental tool to improve our knowledge on the chemical content of planetary nebulae. With the arrival of very efficient spectrographs installed in the largest ground-based telescopes, outstanding spectra have been obtained. These data are essential to constrain state-of-the-art nucleosynthesis models in asymptotic giant branch stars and, in general, to understand the chemical evolution of our Galaxy. In this paper we review the last advances on the chemical composition of the ionized gas in planetary nebulae based on faint emission lines observed through very deep spectrophotometric data.

This paper reports on a new and swift hydrothermal chemical route to prepare titanate nanostructures (TNS) avoiding the use of crystalline TiO2 as starting material. The synthesis approach uses a commercial solution of TiCl3 as titanium source to prepare an amorphous precursor, circumventing the use of hazardous chemical compounds. The influence of the reaction temperature and dwell autoclave time on the structure and morphology of the synthesised materials was studied. Homogeneous titanate nanotubes with a high length/diameter aspect ratio were synthesised at 160^{\circ}C and 24 h. A band gap of 3.06\pm0.03 eV was determined for the TNS samples prepared in these experimental conditions. This value is red shifted by 0.14 eV compared to the band gap value usually reported for the TiO2 anatase. Moreover, such samples show better adsorption capacity and photocatalytic performance on the dye rhodamine 6G (R6G) photodegradation process than TiO2 nanoparticles. A 98% reduction of the R6G concentration was achieved after 45 minutes of irradiation of a 10 ppm dye aqueous solution and 1 g/L of TNS catalyst.

The spectral smoothness properties of the low-frequency array of the Square Kilometer Array (SKA), namely SKA-Low, are an important issue for its scientific objectives to be attainable. A large array of 256 log-periodic dipole antennas, installed on top of a 42~m circular ground plane, will work as an SKA-Low station in the frequency range 50-350 MHz. In this article, the ground plane induced effects are examined in terms of antenna beam spectral characteristics, while different antenna placements are considered. Results are produced both at isolated antenna and at array level in the band 50-100 MHz, by employing an approximate method for the speeding-up of array simulations. We attempt to distinguish the ground plane effect from that of mutual coupling among antennas, which appears to be more severe at specific frequencies, using 2 figures of merit. The Discrete Fourier Transform (DFT) components of gain pattern ratios identify the fundamental spatial components of the ripple, while the Envelope Correlation Coefficient quantifies the penalty to considering an infinite ground plane.

This paper describes the 2018 Planck CMB likelihoods, following a hybrid approach similar to the 2015 one, with different approximations at low and high multipoles, and implementing several methodological and analysis refinements. With more realistic simulations, and better correction and modelling of systematics, we can now make full use of the High Frequency Instrument polarization data. The low-multipole 100x143 GHz EE cross-spectrum constrains the reionization optical-depth parameter tau to better than 15% (in combination with with the other low- and high-ell likelihoods). We also update the 2015 baseline low-ell joint TEB likelihood based on the Low Frequency Instrument data, which provides a weaker tau constraint. At high multipoles, a better model of the temperature-to-polarization leakage and corrections for the effective calibrations of the polarization channels (polarization efficiency or PE) allow us to fully use the polarization spectra, improving the constraints on the LambdaCDM parameters by 20 to 30% compared to TT-only constraints. Tests on the modelling of the polarization demonstrate good consistency, with some residual modelling uncertainties, the accuracy of the PE modelling being the main limitation. Using our various tests, simulations, and comparison between different high-ell implementations, we estimate the consistency of the results to be better than the 0.5sigma level. Minor curiosities already present before (differences between ell<800 and ell>800 parameters or the preference for more smoothing of the C_ell peaks) are shown to be driven by the TT power spectrum and are not significantly modified by the inclusion of polarization. Overall, the legacy Planck CMB likelihoods provide a robust tool for constraining the cosmological model and represent a reference for future CMB observations. (Abridged)

We present a systematic study of the BVRI colours of novae over the course of their eruptions. Where possible, interstellar reddening was measured using the equivalent widths of Diffuse Interstellar Bands (DIBs). Some novae lack spectra with sufficient resolution and signal-to-noise ratios; therefore, we supplement as necessary with 3D and 2D dust maps. Utilising only novae with DIB- or 3D-map-based E(B-V), we find an average intrinsic (B-V)_0 colour of novae at V-band light curve peak of 0.18 with a standard deviation of 0.31, based on a sample of 23 novae. When the light curve has declined by 2 magnitudes (t_2), we find an average (B-V)_0 = -0.02 with a standard deviation of 0.19. These average colours are consistent with previous findings, although the spreads are larger than previously found due to more accurate reddening estimates. We also examined the intrinsic (R-I)_0 and (V-R)_0 colours across our sample. These colours behave similarly to (B-V)_0, except that the (V-R)_0 colour gets redder after peak, likely due to the contributions of emission line flux. We searched for correlations between nova colours and t_2, peak V-band absolute magnitude, and GeV gamma-ray luminosity, but find no statistically significant correlations. Nova colours can therefore be used as standard "crayons" to estimate interstellar reddening from photometry alone, with 0.2--0.3 mag uncertainty. We present a novel Bayesian strategy for estimating distances to Galactic novae based on these E(B-V) measurements, independent of assumptions about luminosity, built using 3D dust maps and a stellar mass model of the Milky Way.

Accurate subsurface scattering solutions require the integration of optical material properties along many complicated light paths. We present a method that learns a simple geometric approximation of random paths in a homogeneous volume of translucent material. The generated representation allows determining the absorption along the path as well as a direct lighting contribution, which is representative of all scattering events along the path. A sequence of conditional variational auto-encoders (CVAEs) is trained to model the statistical distribution of the photon paths inside a spherical region in presence of multiple scattering events. A first CVAE learns to sample the number of scattering events, occurring on a ray path inside the sphere, which effectively determines the probability of the ray being absorbed. Conditioned on this, a second model predicts the exit position and direction of the light particle. Finally, a third model generates a representative sample of photon position and direction along the path, which is used to approximate the contribution of direct illumination due to in-scattering. To accelerate the tracing of the light path through the volumetric medium toward the solid boundary, we employ a sphere-tracing strategy that considers the light absorption and is able to perform statistically accurate next-event estimation. We demonstrate efficient learning using shallow networks of only three layers and no more than 16 nodes. In combination with a GPU shader that evaluates the CVAEs' predictions, performance gains can be demonstrated for a variety of different scenarios. A quality evaluation analyzes the approximation error that is introduced by the data-driven scattering simulation and sheds light on the major sources of error in the accelerated path tracing process.

We present new radio images of the supernova remnant (SNR) CTA 1 at 1420 and 408 MHz, and in the 21 cm line of H I observed with the Dominion Radio Astrophysical Observatory Synthesis Telescope and at 1420 MHz observed with the Effelsberg 100 m telescope. We confirm previously described continuum features and elaborate further on filamentary features identified using the high-resolution (1') maps from these new observations. We investigate the abrupt change in sign of rotation measure (RM) across the SNR, using the linear polarization observations in the four bands around 1420 MHz. Following X. H. Sun et al.'s (2011) investigation, we both confirm that the distribution of signs of the RMs for extragalactic sources in the area appears to match that of the shell, as well as combine the data from the four bands to estimate the relative depolarization and the intrinsic rotation measure of the SNR. We do not conclusively reject X. H. Sun et al.'s (2011) claim of a Faraday screen in the foreground causing the distribution of RMs that we observe; however, we do suggest an alternative explanation of a swept-up stellar wind from the progenitor star with a toroidal magnetic field. Finally, we expand on the analysis of the H I observations by applying the Rolling Hough Transform to isolate filamentary structure and better identify H I emission with the SNR. Further constraining the H I velocity channels associated with CTA 1, we use more recent Galactic rotation curves to calculate an updated kinematic distance of 1.09 +/- 0.2 kpc.

The recently launched James Webb Space Telescope (JWST) is opening new observing windows on the distant universe. Among JWST's instruments, the Mid Infrared Instrument (MIRI) offers the unique capability of imaging observations at wavelengths lambda > 5mum. This enables unique access to the rest frame near infra-red (NIR, lambda ge 1\mum) emission from galaxies at redshifts z>4 and the visual (lambda gtrsim 5000\AA) rest frame for z>9. We here report on the guaranteed time observations (GTO) from the MIRI European Consortium, of the Hubble Ultra Deep Field (HUDF), forming the MIRI Deep Imaging Survey (MIDIS), consisting of an on source integration time of sim41 hours in the MIRI/F560W (5.6 mum) filter. To our knowledge, this constitutes the longest single filter exposure obtained with JWST of an extragalactic field as yet.

Topological materials provide a platform that utilizes the geometric characteristics of structured materials to control the flow of waves, enabling unidirectional and protected transmission that is immune to defects or impurities. The topologically designed photonic materials can carry quantum states and electromagnetic energy, benefiting nanolasers or quantum photonic systems. This article reviews recent advances in the topological applications of photonic materials for radiative heat transfer, especially in the near field. When the separation distance between media is considerably smaller than the thermal wavelength, the heat transfer exhibits super-Planckian behavior that surpasses Planck's blackbody predictions. Near-field thermal radiation in subwavelength systems supporting surface modes has various applications, including nanoscale thermal management and energy conversion. Photonic materials and structures that support topological surface states show immense potential for enhancing or suppressing near-field thermal radiation. We present various topological effects, such as periodic and quasi-periodic nanoparticle arrays, Dirac and Weyl semimetal-based materials, structures with broken global symmetries, and other topological insulators, on near-field heat transfer. Also, the possibility of realizing near-field thermal radiation in such topological materials for alternative thermal management and heat flux guiding in nano-scale systems is discussed based on the existing technology.

Machine learning models in astrophysics are often limited in scope and cannot adapt to data from new instruments or tasks. We introduce SpectraFM, a Transformer-based foundation model architecture that can be pre-trained on stellar spectra from any wavelength range and instrument. SpectraFM excels in generalization by combining flexibility with knowledge transfer from pre-training, allowing it to outperform traditional machine learning methods, especially in scenarios with limited training data. Our model is pre-trained on approximately 90k examples of synthetic spectra to predict the chemical abundances (Fe, Mg, O), temperature, and specific gravity of stars. We then fine-tune the model on real spectra to adapt it to observational data before fine-tuning it further on a restricted 100-star training set in a different wavelength range to predict iron abundance. Despite a small iron-rich training set of real spectra, transfer learning from the synthetic spectra pre-training enables the model to perform well on iron-poor stars. In contrast, a neural network trained from scratch fails at this task. We investigate the Transformer attention mechanism and find that the wavelengths receiving attention carry physical information about chemical composition. By leveraging the knowledge from pre-training and its ability to handle non-spectra inputs, SpectraFM reduces the need for large training datasets and enables cross-instrument and cross-domain research. Its adaptability makes it well-suited for tackling emerging challenges in astrophysics, like extracting insights from multi-modal datasets.

We report the measurement of the electric dipole moment of aluminum monochloride (AlCl) using a cryogenic buffer-gas beam source. Our measurements provide values for the dipole moments of the two lowest vibrational states of the X^1Sigma^+ and the A^1Pi electronic states. We also show that spin-orbit coupling with an extended number of spin states is essential in the ab initio calculation to correctly describe both the dipole moment and the Te energy of AlCl. We further lay out the implications of these results for astrophysical models of stellar and planetary evolution that have used a substitute value for the dipole moment of AlCl until now.

We model and study the processes of excitation, absorption, and transfer in various networks. The model consists of a harmonic oscillator representing a single-mode radiation field, a qubit acting as an antenna, a network through which the excitation propagates, and a qubit at the end serving as a sink. We investigate how off-resonant excitations can be optimally absorbed and transmitted through the network. Three strategies are considered: optimising network energies, adjusting the couplings between the radiation field, the antenna, and the network, or introducing and optimising driving fields at the start and end of the network. These strategies are tested on three different types of network with increasing complexity: nearest-neighbour and star configurations, and one associated with the Fenna-Matthews-Olson complex. The results show that, among the various strategies, the introduction of driving fields is the most effective, leading to a significant increase in the probability of reaching the sink in a given time. This result remains stable across networks of varying dimensionalities and types, and the driving process requires only a few parameters to be effective.

Strong collective interaction of atoms with an optical cavity causes normal mode splitting of the cavity's resonances, whose width is given by the collective coupling strength. At low optical density of the atomic cloud the intensity distribution of light in the cavity is ruled by the cavity's mode function, which is solely determined by its geometry. In this regime the dynamics of the coupled atom-cavity system is conveniently described by the open Dicke model, which we apply to calculating normal mode splitting generated by periodically ordered clouds in linear and ring cavities. We also show how to use normal mode splitting as witness for Wannier-Bloch oscillations in the tight-binding limit. At high optical density the atomic distribution contributes to shaping the mode function. This regime escapes the open Dicke model, but can be treated by a transfer matrix model provided the saturation parameter is low. Applying this latter model to an atomic cloud periodically ordered into a one-dimensional lattice, we observe the formation of photonic bands gaps competing with the normal mode splitting. We discuss the limitations of both models and point out possible pathways to generalized theories.

We present the discovery of 118 new ultracool dwarf candidates, discovered using a new machine learning tool, named SMDET, applied to time series images from the Wide-field Infrared Survey Explorer. We gathered photometric and astrometric data to estimate each candidate's spectral type, distance, and tangential velocity. This sample has a photometrically estimated spectral class distribution of 28 M dwarfs, 64 L dwarfs, and 18 T dwarfs. We also identify a T subdwarf candidate, two extreme T subdwarf candidates, and two candidate young ultracool dwarfs. Five objects did not have enough photometric data for any estimations to be made. To validate our estimated spectral types, spectra were collected for 2 objects, yielding confirmed spectral types of T5 (estimated T5) and T3 (estimated T4). Demonstrating the effectiveness of machine learning tools as a new large-scale discovery technique.

Recent JWST observations with NIRCam and MIRI of the ultra-short-period super-Earth 55 Cancri e indicate a possible volatile atmosphere surrounding the planet. Previous analysis of the NIRCam spectra suggested potential absorption features from CO2 or CO and significant sub-weekly variability. The MIRI low-resolution spectrum does not contain substantial features but was found to be consistent with effective heat redistribution models. In this work, we computed a grid of over 25000 self-consistent 1D forward models incorporating H-N-O-C-S-P-Si-Ti equilibrium chemistry and assessed plausible atmospheric compositions based on the current JWST data. Despite exhaustive analysis, the composition and properties of the atmosphere remain elusive. While our results statistically favour a global, hydrogen-free, nitrogen-dominated atmosphere enriched in PO and CO2, various alternative compositions, including H2O-,CO-, PH3-, or Si-bearing remain viable explanations. Unconstrained heat redistribution efficiency and absolute NIRCam flux are among the largest sources of uncertainty in our analysis. We also find that the heat redistribution factor and surface pressure are highly degenerate with atmospheric composition, and that these parameters cannot be independently constrained using current JWST observations. Furthermore, we show that the observed variability may arise from dynamic interactions between the atmosphere and an underlying magma ocean, driving rapid shifts in atmospheric chemistry and thermal emission. Our results highlight the importance of using self-consistent forward models when analysing novel JWST spectra with limited signal-to-noise ratios -- such as those of 55 Cancri e -- as it allows for a more comprehensive evaluation of potential atmospheric scenarios while also being less sensitive to subtle spectral differences than retrievals...

Designing nanophotonic structures traditionally grapples with the complexities of discrete parameters, such as real materials, often resorting to costly global optimization methods. This paper introduces an approach that leverages generative deep learning to map discrete parameter sets into a continuous latent space, enabling direct gradient-based optimization. For scenarios with non-differentiable physics evaluation functions, a neural network is employed as a differentiable surrogate model. The efficacy of this methodology is demonstrated by optimizing the directional scattering properties of core-shell nanoparticles composed of a selection of realistic materials. We derive suggestions for core-shell geometries with strong forward scattering and minimized backscattering. Our findings reveal significant improvements in computational efficiency and performance when compared to global optimization techniques. Beyond nanophotonics design problems, this framework holds promise for broad applications across all types of inverse problems constrained by discrete variables.

Planar metasurfaces can profoundly control electromagnetic scattering. At microwave frequencies, such devices are typically implemented using multilayer cascades of patterned metallic sheets, whose design often requires time-consuming full-wave optimization. Here, we extend analytical models originally developed for sparse loaded-wire metagratings to accurately describe densely packed Jerusalem-cross meta-atoms embedded in standard printed circuit board (PCB) dielectric stacks. The model captures both near- and far-field coupling within and between layers, enabling efficient prediction of the dual-polarized response. Using this framework, we identify highly transmissive meta-atoms whose phase is controlled by the leg lengths of the Jerusalem crosses (microscopic design stage). This (phase)-(leg-length) "lookup table" allows rapid synthesis of Huygens' metasurfaces (macroscopic design stage), demonstrated through a full-wave-validated metalens exhibiting low-reflection beam manipulation. Notably, we implement a judicious scaling method to further extend the model to predict wideband meta-atom responses. In the companion paper (Part II), a hybrid machine-learning approach leverages this semianalytical framework to enhance accuracy without requiring the conventional exhaustive full-wave training, enabling ultrafast inverse design across the full parameter space. Overall, the presented methodology -- the standalone semianlytical scheme (Part I) and the machine-learning enhanced version (Part II) -- establishes an effective open-source toolkit for versatile, rapid, and highly accurate synthesis of fabrication-ready dual-polarized transmissive Huygens' meta-atoms and metasurfaces.

The galaxy population is strongly bimodal in both colour and morphology, and the two measures correlate strongly, with most blue galaxies being late-types (spirals) and most early-types, typically ellipticals, being red. This observation has led to the use of colour as a convenient selection criteria to make samples which are then labelled by morphology. Such use of colour as a proxy for morphology results in necessarily impure and incomplete samples. In this paper, we make use of the morphological labels produced by Galaxy Zoo to measure how incomplete and impure such samples are, considering optical (ugriz), NUV and NIR (JHK) bands. The best single colour optical selection is found using a threshold of g-r = 0.742, but this still results in a sample where only 56% of red galaxies are smooth and 56% of smooth galaxies are red. Use of the NUV gives some improvement over purely optical bands, particularly for late-types, but still results in low purity/completeness for early-types. No significant improvement is found by adding NIR bands. With any two bands, including NUV, a sample of early-types with greater than two-thirds purity cannot be constructed. Advances in quantitative galaxy morphologies have made colour-morphology proxy selections largely unnecessary going forward; where such assumptions are still required, we recommend studies carefully consider the implications of sample incompleteness/impurity.

We present the third data release of the European Space Agency's Gaia mission, GDR3. The GDR3 catalogue is the outcome of the processing of raw data collected with the Gaia instruments during the first 34 months of the mission by the Gaia Data Processing and Analysis Consortium. The GDR3 catalogue contains the same source list, celestial positions, proper motions, parallaxes, and broad band photometry in the G, G_{BP}, and G_{RP} pass-bands already present in the Early Third Data Release. GDR3 introduces an impressive wealth of new data products. More than 33 million objects in the ranges G_{rvs} < 14 and 3100 <T_{eff} <14500 , have new determinations of their mean radial velocities based on data collected by Gaia. We provide G_{rvs} magnitudes for most sources with radial velocities, and a line broadening parameter is listed for a subset of these. Mean Gaia spectra are made available to the community. The GDR3 catalogue includes about 1 million mean spectra from the radial velocity spectrometer, and about 220 million low-resolution blue and red prism photometer BPRP mean spectra. The results of the analysis of epoch photometry are provided for some 10 million sources across 24 variability types. GDR3 includes astrophysical parameters and source class probabilities for about 470 million and 1500 million sources, respectively, including stars, galaxies, and quasars. Orbital elements and trend parameters are provided for some 800,000 astrometric, spectroscopic and eclipsing binaries. More than 150,000 Solar System objects, including new discoveries, with preliminary orbital solutions and individual epoch observations are part of this release. Reflectance spectra derived from the epoch BPRP spectral data are published for about 60\,000 asteroids. Finally, an additional data set is provided, namely the Gaia Andromeda Photometric Survey (abridged)

We introduce a platform to achieve ultra-strong coupling (USC) between light and matter using widely available materials. USC is a light-matter interaction regime characterized by coupling strengths exceeding 10% of the ground state energy. It gives rise to novel physical phenomena, such as efficient single-photon coupling and quantum gates, with applications in quantum sensing, nonlinear optics, and low-threshold lasing. Although early demonstrations in plasmonic systems have been realized, achieving USC in dielectric platforms, which offer lower losses and high Q-factors, remains challenging due to typically low mode overlap between the photonic field and the material resonance. Here we leverage dielectric dual gradient metasurfaces supporting quasi-bound states in the continuum to spatially encode both the spectral and coupling parameter space and demonstrate USC to an epsilon-near-zero (ENZ) mode in an ultra-thin SiO2 layer. The strong out-of-plane electric fields in our tapered bar structure overlap exceptionally well with those of the ENZ mode, resulting in a normalized coupling strength of 0.101 and a mode splitting equivalent to 20% of the ENZ mode energy; a four- to five-fold increase compared to previous approaches. The strong field confinement of our approach opens new possibilities for compact and scalable polaritonic devices, such as tunable frequency converters and low-energy optical modulators.

Ultrasonic acoustic fields have recently been used to generate haptic effects on the human skin as well as to levitate small sub-wavelength size particles. Schlieren imaging and background-oriented schlieren techniques can be used for acoustic wave pattern and beam shape visualization. These techniques exploit variations in the refractive index of a propagation medium by applying refractive optics or cross-correlation algorithms of photographs of illuminated background patterns. Here both background-oriented and traditional schlieren systems are used to visualize the regions of the acoustic power involved in creating dynamic haptic sensations and dynamic levitation traps. We demonstrate for the first time the application of back-ground-oriented schlieren for imaging ultrasonic fields in air. We detail our imaging apparatus and present improved algorithms used to visualize these phenomena that we have produced using multiple phased arrays. Moreover, to improve imaging, we leverage an electronically controlled, high-output LED which is pulsed in synchrony with the ultrasonic carrier frequency.